-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
Add the Fader 1 (Mono Fader) to your 500 module channel strip, to your hybrid recording signal path, or for "Riding the Fader" while recording.
$249.00
The One Fader Series is three models of outboard fader. Each model has a single 100mm slide fader and high performance circuitry in a compact desktop enclosure.
The One Fader is 100% analog with a transparent neutral signal path that will handle balanced signals up to +28dBu. All audio inputs and outputs are fully balanced and available on XLR and TRS connectors so you can connect the One Fader to virtually any line level device. For product compatibility all One Fader models have accessible jumpers that can provide an extra 6dB or 10dB of gain.
♦ 100mm Mono Slide Fader.
♦ 100% analog signal path.
♦ Small rugged desktop enclosure.
♦ Balanced input and output with Neutrik XLR connectors.
♦ Ultra-low noise transparent circuitry with +28dBu maximum input and output. Will not add coloration to your signal path.
♦ Jumper to select 0, 6, or 10 dB of gain.
♦ Internal linear power supply.
♦ 120V or 230V external power module included.
♦ Made in San Diego, CA USA.
The One Fader is the work of Vince Poulos, the designer and owner of Speck Electronics.
Speck Electronics has been producing quality professional audio products for over 45 years. Founded in 1973, Speck Electronics has consistently provided innovations in audio products for all segments of professional recording and touring.
Other products include the via Fader, X.Sum line mixer, EQF 810 equalizer, and MicPre 5.0 preamp.
Frequency Response (10 dB gain)
2Hz-85kHz (+0/-.5dB)
THD+n (Gain 0, Output +24dBu)
.0008%
Noise (22Hz-22kHz)
-96dBu (Fader set at "0" mark)
Maximum Input Level
+28dBu
Maximum Output Level
+28dBu
Input Impedance
30K Ohms (Balanced)
15K Ohms (Unbalanced)
Output Impedance
60 Ohms
Shipping Weight
5 Lbs (2.5kg)