-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
Large-diaphragm FET Condenser Mic with Five Polar Patterns, Dual-Outputs (Stereo, with Patterns being switchable after recording) Three Pad Pre-attenuation Levels and Frequency-Switchable Highpass Filters.
$599.00
Our best price is too low to print,
but we'll email it to you immediately!
How to get a lower price, instantly!
Why do we do this?
Some manufacturers have a "minimum advertised price", which restricts how low of a price we can display. By requesting an e-mail quote from us, you give us the ability to offer you a lower price than anywhere else on the web. A quote on the product will be sent instantly to the e-mail address you enter, and you can add the product to your cart at the lower price displayed in the e-mail.
Ultimate FET studio microphone.
Whether you're recording studio vocals or stereo drum overheads, the LCT 640 TS is up to the task.
Its forward-thinking feature set has been officially certified by the Music and Technology Alliance (MET), consisting of top award-winning audio engineers/producers, including Elliot Scheiner, George Massenburg, and Sylvia Massy, just to name a few.
Watch the video and learn why the LCT 640 TS should be part of every microphone locker.
Record every detail.
For when you need beautifully bright and clear recordings, the professional-grade FET circuitry of the LCT 640 TS will let you hear every nuance of the performance.
You'll get perfect clarity, and small details will shine through, making it the best choice for vocals, stringed instruments, piano, or even ASMR recordings.
One mic, two channels with Dual Output Mode.
Stereo recording can be time-consuming and challenging. With the LCT 640 TS, you can record perfect, in-phase stereo with a single microphone.
The signals from the front and back of the LCT 640 capsule can be output on two separate channels, making it adaptable to both solo vocals and wide open rooms and even choirs.
More freedom and flexibility.
The LCT 640 TS gives you all the control you'll ever need from a microphone.
Type
Condenser, externally polarized
Acoustical operating principle
Pressure gradient transducer
Diaphragm
3 micron gold sputtered Mylar
Transducer Ø
25.4 mm, 1 in
Polar pattern
Dual Output Mode: create any polar pattern in post-production / Multi-Pattern Mode: Omni, wide cardioid, cardioid, supercardioid, figure-8
Frequency range
20 ... 20,000 Hz
Sensitivity
31.4 mV/Pa, -30.1 dBV/Pa
Self-noise
10 dB (A)
Max. SPL for 0.5 % THD
134 dBSPL, 0 dB attenuation
Signal / noise ratio
84 dB (A)
Dynamic range
124 dB (A)
Attenuation
0 dB
-6 dB
-12 dB
-18 dB
Low-cut filter
linear
40 Hz (12 dB/oct)
80 Hz (12 dB/oct)
160 Hz (6 dB/oct)
Internal impedance
110 Ω
Supply voltage
48 V ± 4 V
Current consumption
5.1 mA
Microphone enclosure
Zinc die cast
Connector
Gold plated 3-pin XLR + Mini 3-pin XLR
Microphone dimensions
158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
Microphone net weight
425 g, 14.9 oz