From Shure
The Shure Beta 87A is a premium quality super cardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.
The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the boomy sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight super cardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.
- Consistent super cardioid polar pattern for high gain-before-feedback
- Smooth response with gradual presence rise
- Electronic LF roll-off compensates for proximity effect
- 117 dB dynamic range
- Low susceptibility to RFI and EM hum
- Advanced shock-mounted cartridge system
- Built-in pop filter
Frequency Response
50 to 20,000 Hz
Polar Pattern
Supercardioid
Output Impedance
Rated at 150 ohms (100 ohms actual +/- 20%)
Recommended minimum load impedance: 800 ohms
Sensitivity (at 1,000 Hz)
Open Circuit Voltage -52.5 dBV/Pa (2 mV)
(1 Pa = 94 dB SPL)
Clipping Level (at 1,000 Hz)
1000 ohm Load: -6 dBV (0.5 V)
Maximum SPL (at 1,000 Hz)
140.5 dB (0.25% THD, 1000 ohm load)
Self-Noise
(equivalent sound pressure level; measured with true RMS voltmeter)
23.5 dB typical, A-weighted
25.5 dB typical, weighted per DIN 45 405 Dynamic Range
117 dB (maximum SPL to A-weighted noise level)
Signal-to-Noise Ratio
70.5 dB at 94 dB SPL (IEC 651)
(S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Power
Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
Current Drain: 1.0 to 1.2 mA
Connector
Three-pin (XLR) professional audio
Case
Aluminum construction with blue metallic finish, and hardened steel grille with nickel satin chrome plating
Net Weight
207 grams (7.6 oz)
Free 3-Year Warranty
Sound Pure stands behind our products. Free three-year warranty on this item. Coverage exclusions live in Terms & Conditions, Section 27.
Level of support and expertise that simply isn't available at big-box megastores. Read the warranty →
Returns
This item is not eligible for the Try-Before-You-Buy 48-hour audition. Standard return policy applies — see Terms & Conditions, Section 18 for details.
You may also like
Browse Solid State →
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.