Sound Pure's Take
The Sebatron VMP Quad Plus (VMP-4000e Plus) is a boutique, four-channel high-voltage Class-A vacuum tube microphone preamplifier hand-built in Melbourne, Australia by designer Sebastian Arnold. Packing four independent channels of true high-plate-voltage tube amplification into a compact 2U rackmount chassis, the VMP Quad Plus delivers rich harmonic warmth, three-dimensional depth, and velvety transient smoothing without the bloated price tag typically attached to multi-channel boutique tube preamps.
What separates the "Plus" edition from earlier Sebatron designs—and from budget "starved-plate" tube preamps—is its true high-voltage discrete Class-A architecture paired with enhanced tonal shaping controls on every channel. Each of the four channels features a dedicated Gain and Output stage for dialing in everything from clean, airy tube clarity to saturated harmonic overdrive, alongside a switchable High-Pass Filter,Air/Bright Presence boost,$-20\text{ dB}$ Pad, and a high-impedance front-panel DI instrument input—making it an extraordinary tracking centerpiece for drums, multi-mic acoustic ensembles, vocals, and bass.
The Sebatron VMP Quad Plus is one of the best-kept secrets in multi-channel tube preamplification. By combining genuine high-voltage Class-A tube warmth, flexible gain/output saturation staging, musical tone-shaping toggles, and four onboard DIs in a 2U chassis, it gives tracking studios an effortlessly musical four-channel front end that punches well above its class.
From Sebatron
The VMPQuadPlus is very similar to the VMP-4000e in the sense that it is a four channel valve microphone preamplifier with the majority of the circuit being almost identical.The differences account for a slightly broader frequency response, a few db of extra gain and a lower reaching bottom but in most recording contexts the differences may be barely perceivable.
The omission of the 'deep' circuitry accounts for the extra db in gain and allows for the inclusion of the pad/gain control to further push the limits and fine tune valve colouration. This adjusts the level in between the two stages of the triode/valve leaving the normal/+12db toggle to adjust the degree of negative feedback around the first stage similar to the 4000e toggle.
In the 'normal' position a slight amount of negative feedback linearizes the first stage and makes it run more transparently whereas in the +12db position the circuit runs in 'open loop' with a pleasing coloured texture.
This allows for a very wide gain range and means the VMPQuadPlus can handle everything from hot Condensers to lightweight Ribbon signals without the use of external pads or lifters.
Other differences include the addition of a front panel face plate that improves shielding and provides some protecton to the toggle switches and a signal LED on each channel to indicate channel activity.
If your recording requirements extend beyond recording drum kits and other rock styled instrumentation and you desire more control over valve colour then the VMPQuadPlus may be suited to your needs.
- Gain
- 70db per channel
- Frequency response
- 20hz-110khz +/- 3db 'air' on
- Mic input impedance
- 1K ohm
- Direct Input impedance
- 1M ohm
- Maximum input
- +10dbu mic ,+16dbu direct
- Maximum output level
- +30dbu
- Noise (EIN)
- -126db
- Mains power input
- ~110/120 or ~220/240
- Current
- 0.8a ~220/240 or 1.6a ~110/120
- Dimensions
- 482mmX190mmX89mm (W-D-H)
- Weight
- Approx. 6kg.
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.