From Manley Laboratories Inc
The Manley Mono Mic Pres are available in two-channel or Mono channel versions, both selectable 40 to 60 dB of gain in precise 5 dB steps. These are primarily intended for use with modern capacitor (condenser) microphones.
Both models are built in thoroughly modern cases with extruded aluminum sides and easily removable top and bottom access covers. Our handsome 1/4" thick CNC milled front panels contain an engraved-for-a-lifetime inlaid insert machined to jewelers' standards. Each unit is also supplied with a 0-volt to chassis strap on the rear panel enabling star-grounding to a single point when installed in a metal rack. Tube complements are common to both models, 1 x military five-star 6072A hand-selected for lowest noise, and 1 x 6414 for each high-current output stage, with the 60 dB version having an additional 12AU7A gain stage. Each unit is pains-takingly hand wired using silver solder and audiophile-grade componentry. Double shielded custom-built power transformers and custom-built high capacity reservoir capacitors demonstrate our modern power supply design approach.
Perennial shoot-out winners, our single-ended preamp designs have become favorites among top engineers and home recorders alike looking for that rich Manley sound with the tight bass and the top end that goes on forever, which begs to go direct to tape.
- Manley all tube microphone preamplifier
- Manley input & output transformers with nickel laminations in mu-metal cases
- Flat frequency response from 10Hz-60KHz
- Mic input PHASE REVERSE switch
- 2400 ohm mic input Z; 48V phantom power built-in
- Hi-Z (100Kohm) 1/4" DIRECT INPUT
- Noiseless conductive plastic INPUT attenuators
- <0.05% THD @ 1Khz S/N ratio: 80dB
- EIN: -125dB
- Adjustable FEEDBACK / GAIN switch selects 5dB steps between 40 to 60 dB of gain
- Hi-current drive <50 ohm LO-Z 1/4" & XLR outputs
- AUTO MUTE w/ warm-up delay for power up/down
- Max. input (with input pad fully open): 450mV
- Max. output: +32dBu
- Max. output (into 600 ohm load): (+15dBm)
- Power consumption (120/240VAC): 18/36 watts
- Dimensions: 19" x 1 3/4" x 10" (occupies 1u)
Warranty
This item is sold without the Sound Pure 3-year warranty (used / B-stock / dealer-exempt). Coverage terms for items in this category live in Terms & Conditions, Section 27.
Returns
Try Before You Buy: 48-hour audition. Program details →
You may also like
Browse Multi-channel Mic Preamps →
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.