From Earthworks
The Ultimate in Audio Measurement.
The M50 is a precision engineered 50kHz omnidirectional measurement microphone ideally suited for acoustical measurements including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely accurate free-field measurement microphone is required.
The Pinnacle of Transparency
An ultra wide flat frequency response that extends from 3Hz to 50kHz and is flat throughout the entire spectrum. An omnidirectional polar response that is exceptionally consistent. A 140dB SPL rating without distortion and no handling noise.
Accuracy in Any Environment
With temperature-compensated electronics, the M50 was built to deliver repeatable results no matter what the environment.
| FREQUENCY RESPONSE | 3Hz to 50kHz |
| POLAR PATTERN | Omnidirectional |
| SENSITIVITY | 34mV/Pa (-29dBV/Pa) |
| POWER REQUIREMENTS | 24-48V Phantom, 10mA |
| MAX ACOUSTIC INPUT | 140dB SPL |
| OUTPUT | XLR (pin 2+) |
| OUTPUT IMPEDANCE | 65Ω balanced (between pins 2 & 3) |
| MIN OUTPUT LOAD | 600Ω between pins 2 & 3 |
| NOISE | 20dB SPL equivalent (A weighted) |
| DIMENSIONS (L x D) | 229mm x 22mm (9.0 x .860 inches) |
| WEIGHT | .5 lb. (225g) |
Free 3-Year Warranty
Sound Pure stands behind our products. Free three-year warranty on this item. Coverage exclusions live in Terms & Conditions, Section 27.
Level of support and expertise that simply isn't available at big-box megastores. Read the warranty →
Returns
This item is not eligible for the Try-Before-You-Buy 48-hour audition. Standard return policy applies — see Terms & Conditions, Section 18 for details.
You may also like
Browse Small Diaphragm Condensers →
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.