Sound Pure's Take

Highly sought-after and revered by recording engineers for decades, the Neve 1073 is a “desert island device” for many and retains its hype and admiration even today. Over the years, however, they’ve become increasingly more difficult to find. Even if you can find one, they typically go for several thousand dollars per mono channel strip.

That’s why, when BAE crafted this spectacular recreation, gear-heads and audio engineers all over the world started chomping at the bit to get their hands on one. Nearly identical in everything from the Carnhill transformers used in the originals to the Canford wiring and Elma switches.  When dealing with something as classic and recognizable as the luscious and musical tonality of the original Neve 1073s, BAE had to take particular care in engineering the entire product exactly the way it was done all those years ago by Rupert Neve himself. The result is an incredible likeness and worthy adaptation. If you’re looking for a 1073 that is built to last, factory-tested, and perfect for any application without all the headache caused by vintage gear quirks and malfunctions, look no further than the BAE 1073 Preamp/EQ.

From BAE

The BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.
 
The BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.
 
  • High Frequency: +/-16dB fixed frequency shelving at 12kHz
  • Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • Mid Range: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz
  • High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz
Frequency Response
10Hz to -3dB at 55kHz
 
3 Band Equaliser
HF: +/-16dB fixed frequency shelving at 12kHz
LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
MF: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz
 
High Pass Filter
50Hz, 80Hz, 160Hz & 300Hz
 
Mic Input Impedance
≈1200/300 ohms
 
Line Input Impedance
10k ohms
 
DI Input Impedance
≈150k ohms
 
Output Impedance
35 ohms
 
Common Mode Rejection Ratio
100dB min @ 60Hz
 
Maximum Output Level
+27.4 dBu @ 600Ω
 
Power Requirements
115/230 VAC, 28W
 
Gain dB
0 to 80 dB
 
Equivalent Input Noise
-110 dBu; Unweighted 300kHz Bandwidth
 
Weight (Single/Dual)
6 LBS / 2.72 KG
10 LBS / 4.54 KG
 
Dimensions in Inches (Module/Rackmount)
45 mm W x 8.75 inches H x 10.5 inches D
19W x  1.75L x 9D

Free 3-Year Warranty

Sound Pure stands behind our products. Free three-year warranty on this item. Coverage exclusions live in Terms & Conditions, Section 27.

Level of support and expertise that simply isn't available at big-box megastores. Read the warranty →

Returns

Try Before You Buy: 48-hour audition. Program details →

Sound Pure Studios Control Room A — Durham, NC

Sound Pure Studios · Durham, NC

Come hear it in our control rooms.

Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.

$3,435