-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
Stereo Set of Large-diaphragm Condenser Microphones with Multiple Polar Patterns
$2,499.00
Engineered and manufactured in Austria, The OC818 is Austrian Audio’s premier, professional, large diaphragm microphone. Its high sensitivity, low self-noise and ability to handle everything from a whisper to extreme SPLs make it the most advanced microphone for studio, broadcast and live applications. As the unique ceramic capsule design is so consistent, any OC818 is match-paired with any other OC818, and when in cardioid mode, it can also be match-paired with any OC18, its affordable, smaller sibling.
♦ Handmade CKR12 ceramic capsule
Made to the same critical dimensions as the classic CK12 capsules
♦ Multiple polar patterns
Cardioid, omnidirectional & custom programmable
♦ Microprocessor control of polarisation voltages
Allows remote controlled polar pattern settings
♦ Two different analogue high-pass filters with three settings
40 Hz, 80 Hz, 160 Hz
♦ Two different types of analogue pads
-10 dB, -20 dB
♦ Dual outputs
for recording each diaphragm separately
Our free PolarPilot app (Android and iOS) allows real-time wireless control over your analogue patterns, high-pass, and pad in realtime via Bluetooth
• Save, recall, and share favourite settings
• Discover and create 255 discrete polar patterns
• One setting may be stored in OC818 for use without the PolarPilot app
• The OC818 is always pure analogue: only the analogue bias voltages are being governed remotely
• Switching also is always analogue
• No digital in either the audio or bias paths. It’s everything you want, with none of what you don’t
• 60 second OC818 clipping monitor/logger
• Wireless control from the comfort of your chair
Making Passion Heard
We bring passion to everything we do, and nobody brings more than our engineering team. Every CKR12 ceramic capsule is handmade in-house at our facility in Vienna and now we are developing the next generation of transducer and microphone builders to serve our expanding customer-base.
Following the closure of the AKG offices in Vienna, we set out to create something new, challenging, and respectful to our heritage. Opening our doors in July 2017, Austrian Audio was born.
Armed with a wealth of experience and a mission to make passion heard, our team of experts were ready to take on the industry giants by striving to produce products that embody the sound and engineering excellence one would expect from a company with our history.
We started with a core team of 22 former AKG personnel from management, acoustics, electronics, test and measurement, mechanical design, RF/wireless, and software and firmware – and are continuing to grow.
We may be relatively new, but the skill, knowledge, and tradition lives on at Austrian Audio, backed by over 350 years of cumulative engineering experience. And we’re not only focused on heritage: keep an eye on where our journey is taking technology, audio, and us.
Directional characteristics: Multi
Impedance: 275 Ω (symmetrical)
Polar pattern: cardioid, omnidirectional, figure-8, supercardioid & custom programmable
Load impedance: > 1 kΩ
Frequency range: 20 Hz - 20 kHz
Supply voltage: 48 V (< 4mA, typical 2.1mA)
Sensitivity (all directions): 13mV/Pa
Main Connector: XLR 3 pin
Equivalent noise level: 9 dB SPL (A)
or remote: Mini XLR 5 pin Connector for back membrane
Max SPL: 148 dB SPL (158 dB SPL)
Dimensions: 157 x 63 x 35 mm
Switchable pad: -10 dB, -20 dB
Weight: 360g
Analog Low Cut filter: 40 Hz (2nd order), 80 Hz (2nd order), 160 Hz (1st order down to 80Hz, 2nd order below)