Massive tone-sculpting power with 3 on-board presets!
$199.00
A tone tweakers delight, the EB-10 works as a preamp, EQ and boost to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.
A tone tweakers delight, the EB-10 works as a preamp, EQ and boost with three available presets to meticulously craft your guitar’s sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.
Use the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn’t know your guitar or bass even had.
Man, there are a lot of pedals out there. Why are we any different? Why are we any good? What’s the why?
I’ll start here – We hear a lot of charming sounds featured on albums a lot of us are listening to. From Dawes to Sigur Ros, from Sting to Mastodon, from Bonnie Raitt to Kendrick Lamar, and from Flying Burrito Brothers to Harry Styles, we are constantly listening to you play music. We are moved by songs, riffs, solos, melodies, lyrics and album art that come from your creativity and hard work. We’re moved by what moves you. That directly correlates to the development of a sound, a box, a pedal. Before we ever sell one, these creations, these prototypes get sent to a chain of artists that we look up to. At Walrus, we all play guitar but not like these folks can. They give it a strenuous workout that includes tour, studio use, weekend gigging, and maybe an occasional Instagram tease. After we get everyone’s notes back, we make changes, then do it again. When it’s perfect (to us), you see it. Then you play it and make songs that move us and inspire us to make better gear. I’m really glad that you are part of our process. I’m thankful that you’re just looking at our site. Thank you.
• Three Band Boost/Cut EQ
• Each rotary knob has four positions of cut and boost available.
• Cutting or boosting is determined by the direction of the associated toggle switch.
• Each knob as a total of 9 positions creating hundreds of tonal combinations
• Pedal can be run in “Live” or “Preset” modes. Preset mode has 3 available slots for saving settings.
• Boots switch engages a 10dB MOSFET boost.
• 9-volt DC, Center Negative, <100mA.
• Made in USA.
© Sound Pure LLC 2024. All Rights Reserved.
Rating: 4.8
919-682-5552