From Universal Audio
High-Resolution Desktop Music Production with Classic Analog Sound.
Key Features
- World-class 24-bit/192 kHz audio conversion
- Realtime UAD Processing — track through vintage Compressors, EQs, Tape Machines, and Guitar Amp plug-ins with near-zero latency*
- New Unison™ technology for stunning models of classic mic preamps**
- Available with either UAD-2 SOLO or UAD-2 DUO DSP Processing onboard
- Includes "Realtime Analog Classics" UAD plug-in bundle
- Thunderbolt connection for blazing-fast PCIe speed on modern Macs
- 2 premium mic/line preamps; 2 line outs; front-panel Hi-Z instrument input and headphone output
- Digitally controlled analog monitor outputs for full resolution at all listening levels
- Uncompromising analog design, superior components, and premium build quality throughout
Record and Mix with Stunning 24-bit/192 kHz Sound Quality
A Complete Analog Studio with Realtime UAD Plug-In Processing
Track Through Classic Mic Preamps Using Unison™ Technology
High-speed Thunderbolt Connection to your Mac
Professional I/O Connections
System
- I/O Complement
- Microphone Inputs Two
- Analog Line Inputs Two
- Hi-Z Instrument Inputs One
- Analog Line Outputs Two (independent mix buses)
- Analog Monitor Outputs Two (one stereo pair, independent L/R mix buses)
- Headphone Outputs One stereo pair (independent L/R mix buses)
- Digital Input Port (TOSLINK optical) One (ADAT or S/PDIF, selectable)
- Thunderbolt Port One (Thunderbolt 2 compatible)
- A/D – D/A Conversion
- Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192
- Bit Depth Per Sample 24
- Simultaneous A/D conversion Two channels
- Simultaneous D/A conversion Six channels
- Analog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rate
- Analog Round-Trip Latency with up to four serial UAD Powered Plug-Ins via Console application 1.1 milliseconds @ 96 kHz sample rate
Analog I/O
- Line Inputs 1 & 2
- Jack Type (combo mic/line balanced inputs) Female ¼” TRS Balanced
- Dynamic Range (A–weighting) 117.5 dB
- Signal-to-Noise Ratio (A–weighting) 117.5 dB
- Total Harmonic Distortion + Noise –108 dBFS
- Common-Mode Rejection Ratio (CMRR) Greater than 60 dB (10’ cable)
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Input Impedance 10K Ohms
- Gain Range +10 dB to +65 dB
- Minimum Input Level (@ Minimum Gain) 18 dBV
- Maximum Input Level (@ Maximum Gain) –37 dBV
- Stereo Level Balance ±0.05 dB
- Microphone Inputs 1 & 2
- Jack Type (combo mic/line balanced inputs) Female XLR Balanced (pin 2 positive)
- Phantom Power (switchable per input) +48V
- Dynamic Range (A–weighting) 118 dB
- Signal-to-Noise Ratio (A–weighting) 118 dB
- Total Harmonic Distortion + Noise –110 dBFS
- Equivalent Input Noise –127 dB
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Common-Mode Rejection Ratio (CMRR) Greater than 70 dB (10’ cable)
- Default Input Impedance 5.4K Ohms (variable via Unison preamp model)
- Gain Range +10 dB to +65 dB
- Pad Attenuation (switchable per input) 20 dB (variable via Unison preamp model)
- Maximum Input Level (@ Minimum Gain, with Pad) 23.8 dBV
- Maximum Input Level (@ Maximum Gain, with Pad) –31.2 dBV
- Hi-Z Input
- Jack Type Female ¼” TS Unbalanced
- Dynamic Range (A–weighting) 117 dB
- Signal-to-Noise Ratio (A–weighting) 117 dB
- Total Harmonic Distortion + Noise –101 dBFS
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Input Impedance 1M Ohms
- Maximum Input Level (@ Minimum Gain) 10 dBV
- Maximum Input Level (@ Maximum Gain) –45 dBV
- Line Outputs 3 & 4
- Jack Type ¼” Female TRS Balanced
- Dynamic Range (A–weighting) 118 dB
- Signal-to-Noise Ratio (A–weighting) 118 dB
- Total Harmonic Distortion + Noise –107 dBFS
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Stereo Level Balance ±0.05 dB
- Channel Separation Greater than 120 dB
- Output Impedance 600 Ohms
- Maximum Output Level 18 dBV
- Monitor Outputs 1 & 2
- Jack Type ¼” Female TRS Balanced
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Dynamic Range (A–weighting) 115 dB
- Signal-to-Noise Ratio (A–weighting) 115 dB
- Total Harmonic Distortion + Noise –105 dBFS
- Channel Separation Greater than 118 dB
- Stereo Level Balance ±0.05 dB
- Output Impedance 600 Ohms
- Output Gain Range –96 dB to 0 dB
- Maximum Output Level 18 dBV
- Operating Reference Level +14 dBu, +20 dBu (selectable)
- Stereo Headphones Output
- Jack Type ¼” Female TRS Stereo (unbalanced)
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Dynamic Range (A–weighting) 113 dB
- Signal-to-Noise Ratio (A–weighting) 113 dB
- Channel Separation Greater than 110 dB
- Total Harmonic Distortion + Noise –101 dBFS
- Stereo Level Balance ±0.11 dB
- Output Impedance 10 Ohms
- Output Gain Range –INF to 0 dB
- Maximum Output Power 80 milliwatts into 600 Ohms
Digital I/O
- S/PDIF
- Connector Type Optical TOSLINK JIS F05 (shared with ADAT)
- Format IEC958
- Supported Sample Rates (kHz) 44.1, 48, 88.2, 96
- S/PDIF Input Channels Two (Stereo L/R)
- ADAT
- Connector Type Optical TOSLINK JIS F05 (shared with S/PDIF)
- Format ADAT Digital Lightpipe with S/MUX
- Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 172.4, 192
- ADAT Input Channels @ 44.1 kHz, 48 kHz 1 – 8
- ADAT Input Channels @ 88.2 kHz, 96 kHz 1 – 4 (S/MUX)
- ADAT Input Channels @ 176.4 kHz, 192 kHz 1 – 2 (S/MUX)
- Clock Synchronization Sources
- Internal, S/PDIF, ADAT (digital clock sync source conditional per selected digital input type)
Electrical
- Power Supply External AC to DC
- AC Connector Type Changable blades (UL, VDE, UK, SSA, CCC)
- AC Requirements 100V – 240V AC, 50 – 60 Hz
- DC Connector Type Male plug, 2.1 mm x 5.5 mm, center positive
- DC Requirements 12 VDC, ±5%
- Maximum Power Consumption 12 Watts
Environmental
- Operating Temperature Range 32º to 95º Farenheit (0º to 35º Celcius)
- Storage Temperature Range –40º to 176º Farenheit (–40 to 80º Celcius)
- Operating Humidity Range 20% to 80%
Mechanical
- Dimensions
- Width 6.31”
- Height 2.60”
- Depth, Chassis Only 5.86”
- Depth, Including Knob & Jack Protrusions 6.20”
- Shipping Box (Length x Width x Height) 8” x 8” x 5.5” (20.32cm x 20.32cm x 13.97cm)
- Weight
- Shipping Weight (with box & accessories) 3.85 pounds
- Weight (bare unit) 2.35 pounds
- Package Contents
- Apollo Twin Unit (SOLO or DUO)
- External Power Supply with (4) changeable AC connectors supporting USA, Europe, UK, Australia, China
- URL Card
Warranty
This item is sold without the Sound Pure 3-year warranty (used / B-stock / dealer-exempt). Coverage terms for items in this category live in Terms & Conditions, Section 27.
Returns
Try Before You Buy: 48-hour audition. Program details →
You may also like
Browse Small (2 Channel) Interfaces →
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.