From Shure
The SM27 is a rugged and versatile large-diaphragm, side-address cardioid condenser microphone. It has low self-noise and extended frequency response that picks up vocal and instrument nuances with clarity.
Durable Shure construction features three separate mesh layers that reduce wind and breath noise. Equally comfortable on stage or in the studio.
- Uniform cardioid pattern for superior off axis rejection
- Superior transient response from a low-mass large Mylar® diaphragm
- Flat, neutral frequency response for natural reproduction on stage or in the studio
- 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
- Durable metal construction.
- Three separate mesh layers reduces wind and breath noise.
- 15dB pad for performance consistency across a wider range of high SPL sources
- Type
- Condenser (externally biased)
- Frequency Response
- 20 to 20,000 Hz
- Polar Pattern
- Cardioid
- Impedance
- 150 Ohms (140 Ohms actual)
- Sensitivity(at 1 kHz, open circuit voltage)
- -37 dBV/Pa
- Sensitivity(at 1 kHz, open circuit voltage)
- 1 Pascal=94 dB SPL
- Maximum SPL (1 kHz at 1% THD)
- 1000 Ohm load: 133 dB (147 dB, Pad on)
- Maximum SPL (1 kHz at 1% THD)
- 2500 Ohm load: 138 dB (152 dB, Pad on)
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
- 84.5 dB
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
- S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
- Dynamic Range (at 1 kHz)
- 1000 Ohm load: 123 dB
- Dynamic Range (at 1 kHz)
- 2500 Ohm load: 128 dB
- Common Mode Rejection (20 Hz to 20 kHz)
- > 50 dB
- Clipping Level (20Hz-20 kHz at 1% THD)
- 1000 Ohm load: 1 dBV
- Clipping Level (20Hz-20 kHz at 1% THD)
- 2500 Ohm load: 7 dBV
- Clipping Level (20Hz-20 kHz at 1% THD)
- THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
- Self Noise (typical, equivalent SPL, A-weighted)
- 9.5 dB
- Polarity
- Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Weight
- Net: 642 g (22.6 oz.)
- Switch
- Attenuator: -15 dB
- Switch
- Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz
- Connector
- Three-pin professional audio (XLR), male
- Power Requirements
- 48 Vdc phantom, 5.4 mA
Manuals & documents
Free 3-Year Warranty
Sound Pure stands behind our products. Free three-year warranty on this item. Coverage exclusions live in Terms & Conditions, Section 27.
Level of support and expertise that simply isn't available at big-box megastores. Read the warranty →
Returns
Not eligible for Try Before You Buy or the 48-hour approval period. Standard return policy applies — see Terms & Conditions, Section 18 for details.
You may also like
Browse Solid State →
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.