Sound Pure's Take

There is a unique charm to these little odd-ball SG inspired Rock 'N Roll Relics.  With one fat P-90 firmly in the bridge position, this axe was designed to plug straight into a stack of tubes, turn up, and bring down the house with old school rock authority.  As simple as it gets, the singular P-90, volume, and tone knob offer the beauty of having nothing to hold your mind back from the music happening around you. Too loud? Too soft? There's a knob for that.  Tone too sharp or round? There's a knob for that.  And with one killer P-90 as your pickup what more could you possibly want to rock the night away?  But don't be fooled into thinking that this guitar is a one trick rock and roll pony. With its simplistic controls, it easily dials in a range of killer tones from rhythm to lead, clean and crunch.  Its small profile neck plays beautifully, and its simplistic charm will keep you smiling for hours on end.  If you prefer a hotter wound pickup the piece with serial number 1268-S is for you.  And on the mellower side the 1380-S will produce slightly less output for a different approach to tone.

From Other (Miscellanous Used/Vintage/Consign)

Rock N’ Roll Relics has been In business since 2005. We are all about building guitars that play great, sound great and look cool. All our guitars are hand-crafted and custom-built from the ground up. Each build is given detailed attention from start to finish.
 
For all our bolt on neck models we use light weight Alder & Ash. All bodies are two piece and light weight. One piece bodies are available for an additional charge.
 
Are bolt on necks are available as follows: Two piece flat sawn maple with maple finger-board and no bee sting or skunk stripe | Flat sawn maple with rosewood finger-board and no bee sting or skunk stripe. All necks have dual acting truss rods with adjust at heel or at headstock. Bolt on neck radius choices: 7.25, 9.5 & 12″ | Profile’s available: C – .840 – .960 / Fat C – .950 – 1.0 / Boat Soft V – 1.0 – 1.0. | Fret wire: Jescar: .047 x.095 medium jumbo. Custom cut necks are available with specific profile, back carve, fret wire, quarter or flat sawn or finger-board wood for additional charges will apply.
 
All our set neck models are made from African Mahogany with 2 way stainless truss rod and the choice of ebony or rosewood finger-board. Radius: 12″ | Profile’s available: 60’s – .8 @1st Fret | ’59 – .877 @ 1st Fret | 50′s (baseball bat) – .955 @ 1st Fret | Fret wire: Jescar- 45/100 medium jumbo.
 
Necks on all models have hand roll edges for a smooth and vintage feel up and and down the neck. 
 
Aging level for bodies, necks and hardware is light, medium and heavy.
 
ALL our finish work Is done In nitrocellulose Lacquer and applied thin and vintage like to achieve that natural feel and tone. No plastics or polly’s are used on any of our builds.

Tuners - Tone Pros on a plate Tuners

Bridge - Tone Pros vintage wrap around with locking studs

David Allen Pickups - Philthy Cats P90's

Volume & Tone Pots - P90's - 500K V 250K T

Capacitors - Vintage .022 Russian Military

Neck Profile - 60's - .8 first fret

Fingerboard - Rosewood

Fretwire - Jescar - 45 x 100 Medium Jumbo

Warranty

This item is sold without the Sound Pure 3-year warranty (used / B-stock / dealer-exempt). Coverage terms for items in this category live in Terms & Conditions, Section 27.

Returns

This item is not eligible for the Try-Before-You-Buy 48-hour audition. Standard return policy applies — see Terms & Conditions, Section 18 for details.

Sound Pure Studios Control Room A — Durham, NC

Sound Pure Studios · Durham, NC

Come hear it in our control rooms.

Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.