Sound Pure's Take

After listening to our monitors with a set of Recoil Stabalizers for only a few minutes we knew that these would become a permanent fixture in both our A room and B room.  Our room is fantastic acoustically, and we also have our monitors on weighted stands, but the RX series pad tightened up the low end and gave us a more detailed representation of what had been recorded.  Every studio should have a set of these under their monitors!

We have shown the RX7 and RX7a versions on our website as they fit most monitors, but we can get any size required for your application.  If you look at the attached PDF, you can find the Recoil Stabalizer that will fit your needs, and email or call us here at the shop to place your order.

From Primacoustic

Designed for nearfield monitors, the Primacoustic Recoil Stabilizer™ is a unique speaker mounting device that at once eliminates disruptive resonant coupling from the loudspeaker to the stand, while providing a stable base that reduces the recoil caused by the forward energy of the loudspeaker motion.


The Recoil Stabilizer is a loudspeaker platform that combines three basic
components: a high-density urethane foam base to isolate the speaker from the shelf, monitor-bridge or stand; a heavy ¼” laser-cut steel plate; and a thin neoprene top surface. The foam effectively decouples the loudspeaker to eliminate vibration-borne resonance that invariably introduces phase anomalies, while the steel plate introduces significant mass to the structure, stabilizing the speaker. The no-slip surface coats the top to ensure the monitor stays firmly in place.


By reducing the backward 'recoil' as the speaker coil pushes energy forward, the initial transient no longer suffers lag and the sharpness of the resulting impulse is more defined. Upon first listening, one immediately notices more punch and extended low end. Upon further listening, one begins to notice greater detail at all frequencies, improved transient response and more defined depth of field. This not only makes mixing easier, but since the Recoils eliminate unknown resonance from contaminating the sound, your mixes immediately translate better to other rooms and audio systems.


The Recoil Stabilizer is available in various sizes, weights and firing angles to address the vast array of speaker designs currently on the market and personal mounting preferences. To make selection easy, we have produced a simple cross-reference chart to match the right Recoil Stabilizer for your monitors.


The Recoil Stabilizer is available in various sizes, weights and firing angles to address the vast array of speaker designs and mounting preferences. Use the reference chart to find the right Recoil Stabilizer for your monitors. Complete details for each model can be found on the specifications page.

The Recoil Stabilizer is a nearfield monitor platform that incorporates four different elements to create the whole. This includes:

1. Isolation foam
High density open cell acoustic foam provides acoustic isolation to eliminate coupling between loudspeaker and shelf.

2. Steel platform
Laser cut ¼” (6mm) steel platform adds the necessary stabilizing mass to rigidly hold the nearfield monitor in place.

3. Curved front panel
Curved front panel eliminates standing waves and adds mass to the platform without increasing the footprint.

4. Retention pad
Thin no-slip neoprene surface ecures the nearfield monitor to the top surface for maximum signal transfer.

 

Free 3-Year Warranty

Sound Pure stands behind our products. Free three-year warranty on this item. Coverage exclusions live in Terms & Conditions, Section 27.

Level of support and expertise that simply isn't available at big-box megastores. Read the warranty →

Returns

This item is not eligible for the Try-Before-You-Buy 48-hour audition. Standard return policy applies — see Terms & Conditions, Section 18 for details.

Sound Pure Studios Control Room A — Durham, NC

Sound Pure Studios · Durham, NC

Come hear it in our control rooms.

Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.

$160