From Neumann USA
THE CAPSULES: 8 PARTS OF PERFECTION
A new level of tonal balance, more body, especially in the bass and mid-range, and transparency in the treble: The newly developed capsules KK 13 (omni), KK 14 (cardioid), and KK 15 (supercardioid) overcome former limitations of the electret principles and capture the signature sound of a wide range of acoustic sources. To achieve this, Neumann developed a layer-based design. Each of the capsulesʼ eight key components are designed for optimal performance, manufactured independently, and assembled by hand later on. The strict quality control also guarantees an unprecedented level of tonal consistency. Each capsule sounds exactly the same and delivers the neutral Neumann-style sound, saving time during setup and EQ tuning especially when running multiple microphones simultaneously. There is also a remarkable sonic consistency across the three capsule types KK 13/14/15, making it possible to combine different polar patterns within the same setup.
With ultra-low self-noise and an extremely high maximum sound level of up to 153 dB SPL, the capsules of the MCM system deliver perfect results with both very quiet and very loud instruments.
The titanium housing is road tough and protects the more sensitive parts for years to come.
CONNECTS TO ALL WIRELESS SYSTEMS
The MCM System includes interchangeable cable options with 3.5 mm jack, LEMO, 4-pin mini-XLR, and MicroDot connectors – no adapter needed. The microphone can also be used in wired mode via the XLR output stages MCM 100 with 3.5 mm jack input or MCM 102 XLR with 3-pin LEMO input.
MOUNTING: GENTLE ON SURFACES – RELIABLE FOR ENGINEERS
A fundamental part of the MCM System is an exhaustive palette of mounting options that allow for simple and reliable microphone positioning on any instrument. Their mechanics are gentle on even the most sensitive surfaces and make mounting a matter of seconds, requiring only one hand for most instruments. Goosenecks in several lengths can be precisely aligned and locked to the instrument clips in one or two axes in 45-degree increments.
INSTRUMENT SETS
All components of the system are available separately. For many common applications, there are also complete sets in a soft case with all the necessary components.
MCM 114 Set High Strings (MC 1)
Complete set for using the Miniature Clip Mic system on the body of a violin, viola, mandolin or similar instrument. Contains: KK 14 capsule, SH 100 gooseneck, KC 1 cable brace, AC 31 cable, MCM 100 output stage, WS 110 windscreen, MC 1 clip. Delivered in a handy soft case.
Also available as MCM 115 Set High Strings with KK 15 supercardioid capsule.
- Acoustical operating principle
- Pressure transducer / Pressure gradient transducer / Pressure gradient transducer
- Directional pattern
- Omni / Cardioid / Supercardioid
- Frequency range
- 20 Hz – 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 3.3 mV/Pa ≅ -49.5 dBV / 3.6 mV/Pa ≅ -49 dBV / 3 mV/Pa ≅ -50.5 dBV ± 2dB
- Rated impedance
- 50 ohms (MCM 100 / MCM 102)
- Rated load impedance
- 1000 ohms
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)¹⁾
- 74 / 71 / 70 dB
- Equivalent noise level, A-weighted¹⁾
- 20 / 23 / 24 dB-A
- Maximum SPL for THD 0.5%²⁾
- 153 / 153 / 154 dB SPL
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)¹⁾
- 62 / 63 / 60 dB
- Equivalent noise level, CCIR¹⁾
- 32 / 31 /34 dB
- Maximum output voltage
- 12 dBu
- Power supply
- 48 V ± 4V (P48, IEC 61938)
- Current consumption
- 3.5 mA
- Matching connector
- XLR 3 F
- Operating temperature range
- 0 °C - +40 °C
- Operating humidity range
- 0 %…75 % rel. hum.
- Storage temperature range
- −20 °C - +70 °C
- Storage humidity range
- 0 %…95 % rel. hum.
1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) measured as equivalent el. input signal
Free 3-Year Warranty
In addition to the standard included manufacturer warranty, virtually all new products carry our exclusive, industry-leading, absolutely free Sound Pure 3-Year Warranty, which includes parts and labor. It's our way of adding real value to the personal touch our small, dedicated team brings to every purchase.
Coverage exclusions live in Terms & Conditions, Section 27. Read the warranty →
You may also like
Browse Stereo Mics & Kits →
Recommended accessories
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.