-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
Mesa Boogie proves once again that you don't have to sacrifice power for portability!
$999.00
SUBWAY® ULTRA-LITE 1x12 BASS CABINETS
Where MESA®’s passion for Design Excellence and Portability meet the demand for Great Tone in a simple, accessible package…the next chapter in the MESA/Boogie® Bass Story awaits; Introducing the SUBWAY® ULTRA-LITE Cabinet. Handcrafted in Petaluma, California, our Lightweight Italian Poplar Cabinets are Tuned and loaded with the following features:
Designed & Handcrafted in Petaluma, California
Tuned Front Ported Tri-Port Porting™ with Aviation style bracing (superior strength/reduced weight)
Lightweight Italian Poplar Cabinets – Legendary Mesa Quality Construction
Custom Subway® Neodymium Speakers & High-Frequency Horn with Premium Attenuator
Combination Speakon & 1⁄4” Input and Parallel Output
Recessed, Flip-Out Metal Handles
Black Bronco Vinyl with Black Metal Grille
Lexan Corners
Slip Cover
Forty-five years and thousands of satisfied customers later, MESA/Boogie® Ltd. hand-builds the fifth generational offspring of that pivotal amplifier (and many more) now known around the globe as the MARK I Boogie®; the world’s first high gain, high power, compact 1x12 amplifier. That revolutionary little combo is the “missing link” in amp design... the pivotal nexus between Vintage and Modern guitar amplifiers. When it comes to amplified guitar, there’s really just two epochs… before Boogie, and after Boogie.
Technical Specifications
Model: Subway 1x12
Input/Output Connectors
Speak-On connectors wired 1+/1-: 2 x SpeakOn-1/4" (NL-4 combo)
Nominal Impedance
Average impedance normalized up to standard value: 8 ohms
Minimum Impedance (@ frequency)
Minimum cabinet impedance value from 20Hz - 5kHz: 7.45 ohms (@ 50.8 Hz)
Average Sensitivity (RMS) (50Hz-1000Hz)
Average sensitivity based on an RMS signal from 50Hz - 5kHz: 97.5dB/1W/1M
Maximum SPL (50Hz-1000Hz)
Maximum SPL calculated from average sensitivity and maximum RMS input power: 124dB/1M
Average Thermal Power (RMS) (50Hz-1000Hz)
Power rating ("RMS") of L.F. driver based on EIA RS-426A standard: 400 Watts
Average Mechanical Power (RMS) (50Hz-1000Hz)
Average power rating ("RMS") based on average safe cone excursion: 400 Watts
Minimum Mechanical Power (RMS) (@ frequency)
Power rating ("RMS") based on the point of maximum safe cone excursion: 385 Watts (@ 74.3Hz)
Low Freq F3 (Hz)
-3dB point of the LF response below the average response: 57.5 Hz
Low Freq F6 (Hz)
-6dB point of the LF response below the average response: 48.1 Hz
Low Freq F10 (Hz)
-10dB point of the LF response below the average response:41.5 Hz
High Freq Response
Nominal HF response, dependent on the position of HF attenuator:>12kHz
Dimensions: 15 1/4" x 19 1/4" x 18 1/4"
Weight: 32.9 lbs.