-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
Crystal Clean 2-Channel Bass Amp Hand Built in the US!
$3,498.00
Our best price is too low to print,
but we'll email it to you immediately!
How to get a lower price, instantly!
Why do we do this?
Some manufacturers have a "minimum advertised price", which restricts how low of a price we can display. By requesting an e-mail quote from us, you give us the ability to offer you a lower price than anywhere else on the web. A quote on the product will be sent instantly to the e-mail address you enter, and you can add the product to your cart at the lower price displayed in the e-mail.
In this world of "Lunch Box" size mega-watt amplifiers we felt that there was a need for an alternative. This amp embodies the tone of the early bass amps we all grew up with.
The 100 watt "PB100" has a 12AX7 preamp tube, a 12AX7 mid-amp tube and a 12AX7 phase inverter tube and 4 - 6L6's power tubes. Power rectification is handled by a GZ34.
This amp has 4 input jacks: 2 on the Bright Channel and 2 for the normal channel (the top jacks are regular and the bottom jack is padded for extra hot pickups or active pickups). These channels can also be bridged to fatten and achieve a hotter output. You can plug into the bright channel (top jack) and then jumper from the bottom jack of the bright to the top jack of the normal. You can then adjust the two volumes to achieve the output you desire.
The Tone Stack for the "89" has: Bright Volume, Normal Volume, High Cut, Mid Cut, Bass Cut, and the most responsive presence control you have ever heard. The presence can sweep from dark to very bright and is perfect for compensating for bright or dark rooms.
This amp is known for its extreme clean tone and headroom with great dynamic response.
This amp is on tour with Brad Albin of the Time Jumpers. Brad can use his acoustic upright bass as well as his vintage Precision Bass with only a small tweak of the tone stack. You need to hear the PB100 and remember what Tube Bass Tone sounds and feels like.
All the Little Walter Tube Amps use Octal Pre-amp tubes and are hand wired with no circuit, tag, or turret boards. I believe the shortest signal path equates to the purest possible tone. These amps are all cathode biased and voiced to allow more low frequency tone to pass through the pre-amp. All my amps also have a direct line out that can be connected to your house PA or recording console. These amps can be ordered with Tweed, Lacquered Tweed, Tolex, or Cherry, Maple, or Walnut hardwood (hardwood based on availability of wood). I personally build these amps one at a time right here in North Carolina.
4 - 6L6 Power Tubes
Bright / Normal Channels
Padded Inputs for Active Pickups
Ported 3x10 Cabinet