-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
A compact yet incredibly powerful and high-quality channel strip!
The Joemeek threeQ is the perfect link between your music and your computer. It will bring out the best qualities or your music by giving it the "gloss" of a professional recording studio, at a fraction of the cost!
Built into a compact ½ rack chassis, we used the same Burr-Brown IC's for the Mic Pre that you'll find on our more expensive studio channels. We then added an extremely musical EQ section and an optical Compressor, for that signature "Meek" sound.
With inputs to accept everything between microphone and instrument levels, the threeQ sounds much larger than it's size!
After 8 years of bringing great sound and creative ideas to the market, Joemeek will go through a major update to its entire product line. As the market gets more and more crowded, Joemeek will streamline its products, improve the build quality and feature sets. The New Joemeek line continue to maintain that Joemeek sound, but offer a more concise product line to avoid confusion with its own models. A new all aluminum front panel anodized in the traditional Joemeek Green will make all of the new products look better as well. More information will be posted as it is made available.
Input impedances: | Mic: 1.2kohm; Line: 20kohm |
Pre-amp overall gain: | 0dB to 60dB |
Common mode rejection: | 70dB |
Equivalent input noise: | -128.5dBu (unweighted) |
Distortion: | 0.001% (below Compressor threshold) |
Frequency response: | 10Hz to 70kHz (-3dB) |
Maximum input before clipping: | Mic: +19.5dBu; Line: +44.5dBu |
Headroom before clipping: | +19.5dBu |
Compressor threshold: | -6dBu to +20dBu (variable) |
Compressor ratio: | 5:1 (typical) |
Compressor attack time: | 1 msec to 100 msec (adaptive) |
Compressor release time: | 0.1 sec to 3 sec (adaptive) |
Nominal output levels: | +4dBu/-10dBv |
Output impedance: | 75ohm |
Output Level switch: | 12dB attenuation |
Noise Floor: | -85dBu (typical, with ~40dB mic gain) |
VU Meter: | 8 segment bargraph |
Power supply: | 12V ac mains adaptor |
Power consumption: | 12W |
Mechanical: | 220W x 44H x 180D (overall) |
Weight: | 1 kilo |
EQ Boost and Cut: | +/-15dB (zero phase-shift bell response) |
LF Frequency : | 80Hz fixed |
MID Frequency : | 300Hz to 5kHz variable |
HF Frequency : | 12kHz fixed |