The BM Compact mkIII is a premium quality, small-format near-field monitor. With an ultrahigh dynamic range, it hits well above its weight class thanks to intelligent design. Using ultralightweight aluminum wire and aluminum voice coils in its hand-crafted drivers, along with a Class D amplifier the BM Compact mkIII provides outstanding performance.

• Extended excursion 5.7" woofer with pure aluminum voice coil.

• 1.1" soft dome tweeter with pure aluminum voice coil.

• Flexible operation with XLR and RCA inputs

• Bundled with IsoAcoustics ISO-L8R155 speaker stand for decoupling and proper angling.

• Optional Dynaudio Professional Volume Box for precision level control

• Made in Denmark

Features

• Higher SPL, greater frequency and power response compared to the previous generation
• 50W LF and 50W HF RMS Class D amplifier with DSP crossover
• 116dB SPL peak power output
• Frequency response of 49 Hz-24 kHz
• Extended bass with BM9S II or 14S II precision subwoofers
• HF, MF, LF analog room filters allow flexible positioning 
• High pass filters at 60/80Hz for perfect subwoofer matching
• Input sensitivity switch (-10/+4dB range)

Double neodymium magnet system with vented pole piece for accurate driver control.  Large diameter voice coil surrounds the magnet for superior linearity.  Aluminum voice coil former and wire are low mass so transient response is quick and accurate. Diaphragm and dust cap are moulded as one piece in patented low-mass, highly rigid Magnesium Silicate providing unrivaled accuracy

IsoAcoustics Monitor Stands 

When we started looking for the best solution for isolating the BM mkIII monitors from the surface, we found that IsoAcoustics provide the best and most flexible product on the market.

Therefore, we formed a partnership with IsoAcoustics that allowed us to bundle every BM mkIII monitor with a dual-branded stand that also allows you to angle your monitors slightly upwards or downwards in order to match your listening position perfectly. 

The ISO-L8R155 is bundled with BM Compact mkIII and BM5 mkIII, while the ISO-L8R200 is included with BM6 mkIII and BM12 mkIII.

Brackets

Designed and manufactured specifically for the Dynaudio by König & Meyer in Germany, the Dynaudio mounting brackets give you maximum reliability and the flexibility to place your Dynaudio Professional monitors where you need them.

Powder coated steel / aluminum construction with 0⁰ - 30⁰ vertical and +/- 45⁰ horizontal adjustment options deliver the optimal solution for most studio settings.

System  Two-way Active Precision Nearfield Monitor

Max SPL 1m, pair (IEC Short Term)  116 dB peak

Input level for 85 dB SPL @ 1m  80 mVrms

Max input level (@setting)  4.8 Vrms (-10dB) 1.5 Vrms (0dB) 1 Vrms (+4dB)

Power consumption  Standby: 0.3 W   Idle: 5.8   Max: 94 W

Amplifier power  Tweeter: 50   Woofer: 50 W

Resonance Frequency  58 Hz

Bass Principle  Bass reflex

Crossover Frequencies  2100 Hz

Crossover Slope  12 dB/oct

Tweeter  D-281 - 28 mm soft dome, rear chamber, magnetic fluid 4 mm aluminum front Pure aluminum wire voice coil

Woofer  145 mm molded aluminum frame/ one piece thermo formed MSP cone 38 mm voice coil with pure aluminum wire on aluminum former

Weight  5,4 kg / 11.9 lbs

Dimensions (W x H x D)  170 x 260 x 211 mm / 6.7” x 10.2” x 8.3”

Free 3-Year Warranty

Sound Pure stands behind our products. Free three-year warranty on this item. Coverage exclusions live in Terms & Conditions, Section 27.

Level of support and expertise that simply isn't available at big-box megastores. Read the warranty →

Returns

Try Before You Buy: 48-hour audition. Program details →