Sound Pure's Take
The AudioScape Opto Comp (AS-2A) is a faithful, hand-wired American recreation of the iconic Teletronix LA-2A leveling amplifier that brings authentic, tube-driven optical compression within reach of modern working studios. Built in Daytona Beach, Florida, the AS-2A pairs a custom-manufactured Kenetek T4B optical attenuator cell with four hand-selected vacuum tubes (12AX7A, 12BH7A, and 6AQ5A) and custom USA-wound Cinemag/UTC-style input and output transformers—delivering the unmistakable smooth gain reduction, three-dimensional midrange bloom, and harmonic weight of a golden-era studio classic.
What makes the AudioScape Opto Comp a standout workhorse on tracking and mixing sessions is its effortless musicality. Like the original 1960s Teletronix hardware, its two-knob workflow (Gain and Peak Reduction) relies on the natural, program-dependent release characteristics of the electroluminescent T4B cell to clamp down on vocal peaks, electric bass, and acoustic guitars without ever sounding pinched or over-compressed. Even when pushing $7\text{ to } 10\text{ dB}$ of gain reduction on dynamic lead vocals, the AS-2A adds warmth, presence, and analog cohesion that locks tracks right to the front of a mix.
The AudioScape Opto Comp (AS-2A) is one of the closest, most musical modern recreations of the classic Teletronix LA-2A available at any price. By combining a genuine Kenetek T4B optical cell, full-voltage tube amplification, and custom American transformer iron, it serves as an indispensable vocal and bass tracking centerpiece for any analog or hybrid studio.
From Audioscape
The AudioScape Opto Comp is a meticulously crafted optical tube compressor that pays homage to a renowned compressor from the 1960s. That compressor was highly regarded for its musicality, smooth compression, and distinctive tone achieved by using an incandescent light bulb and optical sensor to control dynamic processing, and passing audio through its tubes and transformers.
Inspired by that widely acclaimed 1960's optical tube compressor, the AudioScape Opto Comp is a faithful re-creation using our own T4B opto-attenuator, NOS Tubes, and big fat iron.
THE WORLD’S MOST BELOVED OPTICAL COMPRESSOR
The AudioScape Opto Comp is a faithful reproduction of the original circuit, with some modern-day modifications to enhance its performance. To ensure authenticity and unparalleled box-tone, it incorporates NOS tubes and NOS carbon-composite resistors. At the heart of the Opto Comp is its custom T4B opto-attenuator, made in-house by our very own techs.
Overall, the Opto Comp strives to recreate the sonic elegance of the legendary compressor it is based on, utilizing the finest components and craftsmanship.
MORE VERSATILE
One significant modern enhancement was moving the R37 high frequency control trim pot to the front panel of the unit. In the 1960’s, this control was located on the back and was set by the factory depending on the application. By moving it to the front, it is now accessible and convenient to adjust.
Originally, this trim pot was factory set to a "flat" side-chain response for recording purposes (fully-clockwise). Now accessible on the front panel, by turning it counter-clockwise you can increase the resistance, filtering out low frequency, high energy elements. This filtering of low frequencies to our T4B opto-attenuator shifts the focus of the compression to higher frequencies. Check out the video below to see how this high frequency trim pot control helps define the compression range and increases its versatility.
T4B BUILT IN-HOUSE
We hand-build our own T4B opto-attenuators in the vintage tradition, using the resistor across the panel, true to the original schematics, as opposed to the newer JBL-era T4Bs used as the standard for other manufacturers.
- Handcrafted in the USA
- Stylish 3U 19" Rackmount USA Made Case and Front Panel (aesthetically period-correct)
- Premium, NOS Tubes in Audio Section - New Production Tubes Don't Cut it in this Circuit
- AudioScape T4B Opto-Attenuator - Custom, Hand-Built and Sonically Period-Correct (true to vintage tradition).
- Exclusive, Custom-Wound Input Transformer (exacting replica of the original)
- Exclusive, Custom-Wound Output Transformer (exacting replica of the original)
- Cornell Dubilier (CDE) Polypropylene Capacitors
- Panasonic Radial Polyester Capacitors
- NOS Allen-Bradley Carbon Comp Resistors
- Carling (the BEST!) Toggle Switches
- +40dB Make-up Gain
- Analog dB Gain-Reduction Meter Perfectly Calibrated
- Davies Original-Styled Knobs
- Electronically Balanced +4dBu circuitry
- Neutrik XLR Input and Output connectors
- Alpha potentiometers and Rotary Switch
- Stereo Link via Cliff TRS Jack (Located on Back of Unit)
- Custom 120V/240V Power Transformer
You may also like
Browse Compressors/Limiters →
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.