From Audient
Professional Audio, Made Effortless.
Powered by Analogue Intelligence.
For the engineer running serious sessions. The iD4+ MK3 (formerly the iD44) is a 20-in / 24-out desktop interface built around two things most in its class can’t offer: built-in RoomTune™ Monitor Correction with the RM1™ in the box, and four tone-shaping Console Mic Preamps with real analogue saturation. Backed by Hardware-Accelerated DSP FX, Balanced Hardware Inserts, 16 channels of ADAT I/O and 32-bit Conversion – all over a single USB-C cable. A commercial studio’s signal chain, on your desktop. All powered by Analogue Intelligence: real analogue at the front of the signal chain, with onboard DSP behind it handling your levels, your room and your FX.
A commercial studio’s signal chain, on your desktop.
- 20-in / 24-out connectivity over USB-C
- 4 × Audient Console Mic Preamps with 75dB clean gain and Smartgain
- 2 × JFET Instrument Inputs on channels 1 and 2
- 2 × Balanced Hardware Inserts on channels 1 and 2
- Built-in RoomTune™ Monitor Correction (RM1™ Reference Microphone included)
- Analogue Tone Suite – HMX for warmth, LIFT for sheen, GLOW for finish and ORBIT for character
- Onboard Hardware-Accelerated DSP FX – EQ, Compression and Reverb with zero latency
- 32-bit Conversion, 128dB Dynamic Range – more than any other interface in its class
- 16 channels ADAT In and Out
- 2 × Independent Headphone Amplifiers with up to 4 Artist Mixes
- Dual Stereo Monitor Outputs with Dedicated Hardware Monitor Controls
- Up to 192kHz sample rate, Mac and Windows compatible
- Full Performance Over USB-C Bus Power, no AC adapter required
Mic Pre Input
- Maximum Input Level
- 18dBu
- THD+N @ 0dBu
- -99dB, 0.0011%
- Gain
- 0 to 75dB
- SNR
- 101dB A-Weighted
- EIN
- -128dB A-Weighted
- Frequency Response
- +/-0.1dB 10Hz to 80kHz
- CMRR
- >70dB
- Crosstalk
- <120dB
- Input Impedance
- 3kΩ
Line Input
- Maximum Input Level
- 28dBu
- THD+N @ 10dBu
- -98dB, 0.0012%
- Gain
- -10 to 65dB
- Input Impedance
- 10kΩ
DI Input
- Maximum Input Level
- 12dBu
- THD+N @ 0dBu
- -60dB, 0.098%
- Gain
- 0 to 75dB
- SNR
- 96dB A-Weighted
- Frequency Response
- +/-0.5dB 10Hz to 40kHz
- Input Impedance
- 500kΩ
Additional Mic Pre Features
- Phantom Power
- +48V DC, 10mA per channel
10dB Pad
Analogue Tone Suite
Analogue Send and Returns (Channels 1 and 2)
ADC Input
- Maximum Input Level
- 18dBu=0dBFS
- THD+N @ -1dBFS
- -110dB, 0.0003%
- Dynamic Range
- 123.5dB A-Weighted
- Frequency Response
- +/-0.5dB 10Hz to Fs/2 (Nyquist)
- Crosstalk
- <120dB
Line Outputs
- Maximum Output Level
- 18dBu=0dBFS
- THD+N @ -1dBFS
- -115dB, 0.00017%
- Dynamic Range
- 128dB A-Weighted
- Frequency Response
- +/-0.5dB 10Hz to Fs/2 (Nyquist)
- Crosstalk
- <125dB/110dB @1k and 10k
- Impedance
- 470Ω
Additional Line Output Features
RoomTune
Headphone Outputs
- Maximum Output Level
- 15dBu=0dBFS
- THD+N @ -6dBFS
- -111dB, 0.0003%
- Dynamic Range
- 125dB A-Weighted
- Frequency Response
- +/-0.5dB 10Hz to Fs/2 (Nyquist)
- Crosstalk
- <130dB, 120dB @1k and 10k
- Impedance
- 2Ω
- Maximum output level and power into 30R
- 3.7V Peak, 456mW
- Maximum output level and power into 60R
- 5.1V Peak, 434mW
- Maximum output level and power into 600R
- 6.2V Peak, 43mW
Digital Features
- Inputs
- Optical Input SPDIF/ADAT x2
- Outputs
- Optical Output SPDIF/ADAT x2
- Word Clock
- Output: +/-10ppm accuracy
- Supported Sample Rates
- 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
DSP Mixer Roundtrip Latency
- DAW mixer (ADC->Host->DAC)
-
- All figures at 64 sample buffer size
- 44.1kHz 5.792ms
- 48kHz 5.521ms
- 88.2kHz 4.083ms
- 96kHz 3.969ms
- 176.4kHz 3.167ms
- 192kHz 3.125ms
- Internal Mixer (ADCs->DACs)
-
- 44.1kHz 0.396ms
- 48kHz 0.365ms
- 88.2kHz 0.198ms
- 96kHz 0.188ms
- 176.4kHz 0.109ms
- 192kHz 0.099ms
Connectivity
USB-C
Power Requirements
Bus Power on USB-C
Or 15W external USB-C supply
Included in the box
Audient iD4+
USB C-C cable 1m
RM1 Reference Microphone + Clip
Weights and Dimensions
- Unit
- 6.9×25.5x13cm, 1.019kg
- Packaged
- 11.5×30.5x18cm, 1.569kg
Free 3-Year Warranty
In addition to the standard included manufacturer warranty, virtually all new products carry our exclusive, industry-leading, absolutely free Sound Pure 3-Year Warranty, which includes parts and labor. It's our way of adding real value to the personal touch our small, dedicated team brings to every purchase.
Coverage exclusions live in Terms & Conditions, Section 27. Read the warranty →
You may also like
Browse Small (2 Channel) Interfaces →Recommended accessories
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.