-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
Stereo Pair Small-diaphragm Cardioid Condenser Stainless Steel Microphones
$1,238.00
Capture everything with the lightning speed of the SR25s. No smearing. No reflections. No unwanted coloration. Just a refreshingly crisp sound with every detail, nuance, and texture flawlessly intact.
The SR25's reveal all of the deep, rich lows without sacrificing the high frequency details. A wide, 140-degree sweet spot coupled with a full 20Hz–25kHz frequency range delivers the perfect sonic image.
Don’t get lost in the mix. Your sound will never be compromised again with over 30dB of off-axis rejection, perfect for high ambient environments and avoiding monitor bleed.
You’ve spent years honing your sound. Deliver the ultimate performance on stage or in the studio and hit as hard as you like. With a staggering SPL input of 145dB, even the loudest drummer won’t overload these mics.
● Perfect for live performances and studio recording
● Matched to 0.5dB for perfect stereo resolution
● Ideal for all stereo recording placement techniques
● Near-perfect cardioid polar pattern consistent across all frequencies
● 140 degree sweet spot sonic image of your whole kit from above
● 20Hz–25kHz frequency response
● Exceptionally high overload capacity
● An SPL rating of 145dB your attack will never distort or overload
● Perfect for drum overheads and hi-hats
● Sanitization-Ready stainless steel. Stay clean. Stay healthy.
● Requires +24-48-Volt phantom power
● Handcrafted and assembled in the USA
● Built to last
Earthworks was formed by David Blackmer, the inventor of dbx, to realize his vision of upgrading the entire audio chain to a new standard of sonic realism. David's goal of creating high definition tools with which to capture the sound and experience of "being there" is based upon a strong evidence that there is more to human hearing than the range of frequencies which can be heard as tones. We are convinced that audio equipment with extended frequency response and faster, cleaner time domain performance will yield more life-like results. Traditional audio methadology appears to be based on working around the limitations, imperfections, and personality quirks of the equipment, and calling the ones you like "assets". WE believe that any part of the audio chain can be improved to the point where the standard is so high that any product meeting it will be indistinguishable from any other product meeting the same standard, and that an audio system built to such standard can achieve sonic reality. This standard, for electronic equipment, is met by our Zero Distortion Technology. We support the concept of recording acoustic events accurately enough to capture the sound as it happened in the room. This approah allows you to make sonic coloration and texture choices later, when you can consider them carefully and still have recourse. Life-like accuracy is the best starting point for whatever unique coloration you may wish to add.
Rise Time Speed: 14 microseconds
Frequency Response: 20Hz-25kHz ±2dB at 12 inches (30cm)
Polar Pattern: Cardioid
Sensitivity: 10mV/Pa (-40dBV/Pa)
Power Requirements: 24-48V Phantom, 10mA
Max Acoustic Input: 145dB SPL
Output: XLR (pin 2+)
Output Impedance: 65Ω balanced (between pins 2 & 3)
Min Output Load: 600Ω between pins 2 & 3
Noise: 20dB SPL equivalent (A weighted)
Dimensions (L x D): 165mm x 22mm (6.5 x .860 inches)
Weight: .35 lb. (160g) each