Walrus Audio Slo Multi-Texture Reverb  From Walrus

• Lush, modulated, sleepy & ambient soundscapes to create and inspire.

• Three custom algorithms. Dark (Lower octave), Rise (Volume Swell) and Dream (Latching Pad reverb).

• Three custom modulated settings: Sine, Warp, Sink.

• Change modulation speed by holding bypass and adjusting depth knob.

• Variable low pass filter for each algorithm.

• Sustain switch allows for even longer decay for moments of added ambience or latching function while in Dream mode.

• Bypass switch features momentary function. Press and hold to temporarily activate pedal.

• 9-volt DC, Center Negative, 100mA minimum.

• Made in USA.

ALGORITHMS

DARK – Add a lower octave to your reverb trail. Here you’ll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.

RISE – This is an auto-swell reverb for beautiful cinematic swells. Don’t rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.

DREAM – Here is a lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and pad will decrescendo according to where decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.

The Slö also features 3 different wave shapes accessible by holding down bypass while switching the algorithm toggle.

SINE – Smooth and even pitch up and down modulation.

WARP – Asymmetric pitch up modulation similar to a warped record.

SINK – Asymmetric pitch down modulation for sinking detune similar to a Bigsby.