-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
The DA-3000 is perfectly designed for stereo PCM/DSD recordings at high sampling frequencies suitable for archival masters. This magnificent unit is capable of recording analog and digital signals up to 192kHz PCM or 5.6MHz DSD. The unit records to both SDHC cards and UDMA supported CF cards.
$949.00
Retail: $999.00
The DA-3000 is perfectly designed for stereo PCM/DSD recordings at high sampling frequencies suitable for archival masters. This magnificent unit is capable of recording analog and digital signals up to 192kHz PCM or 5.6MHz DSD. The unit records to both SDHC cards and UDMA supported CF cards.
The beginning of TASCAM starts with the founding of TEAC nearly fifty years ago. In 1953, a pair of engineers in Japan - the Tani brothers - created the first TEAC product line, which was comprised of open-reel audio tape recorders. In the late 1960's, the Tani brothers and Dr. Abe, a senior engineer at TEAC, formed a special R&D group named TASC (TEAC Audio Systems Corp.) for the purpose of researching ways to apply TEAC's recording technology for musicians and recording studios. TASCAM (TASC AMerica Corp.) was established in 1971 for the purpose of distributing TASC products in the U.S. and conducting additional market research. The company's first home was at 5440 McConnell Avenue, on the west side of Los Angeles near Marina del Rey.
Supported media
SDSupports 4GB to 32GB SDHC cards
(Media ejection method: push-push)
CFSupports 1GB to 64GB Type I CF cards
USB (Playback and copying only)Supports 2GB to 64GB USB flash drives
Recording and playback formats
PCMBWF(rec/play) / WAV(playback only),
44.1/48/88.2/96/176.4/192kHz,
16/24bit
DSDDSDIFF / DSF,
2.8224/5.6448MHz
Number of channels2 mono(or 1 stereo)
ANALOG INPUTS
UNBALANCED
ConnectorRCA pin jacks
Standard input level-10dBV
Maximum input level+6dBV
Minimum input level-22dBV
Input impedance22k ohms or greater
BALANCED
ConnectorXLR-3-31(1:GND,2:HOT,3:COLD)
Standard input level+4dBu
+6dBu(only when maximum input level is +15dBu)
Maximum input level+15dBu,+18dBu,+20dBu,+22dBu,+24dBu(switchable in menu)
Minimum input level-8dBu
-6dBu(only when maximum input level is +15dBu)
Input impedance10k ohms or greater
ANALOG OUTPUTS
UNBALANCED
ConnectorRCA pin jacks
Standard output level-10dBV
Maximum output level+6dBV
Output impedance200 ohms or less
BALANCED
ConnectorXLR-3-31(1:GND,2:HOT,3:COLD)
Standard output level+4dBu
+6dBu(only when maximum input level is +15dBu)
Maximum output level+15dBu,+18dBu,+20dBu,+22dBu,+24dBu(switchable in menu)
Output impedance100 ohms or less
DIGITAL INPUT
S/PDIF,CASCADEUNBALANCED
ConnectorRCA pin jacks
FormatIEC60958-3(S/PDIF)
Input impedance75 ohms
Input frequency
when SRC OFF44.1/48/88.2/96/176.4/192kHz
when SRC ON32 - 216kHz
Allowable frequency deviation+/-100ppm(when SRC OFF)
AES/EBUBALANCED
ConnectorXLR-3-31(1:GND,2:HOT,3:COLD)
FormatAES3-2003/IEC60958-4(AES/EBU)
Input impedance110 ohms
Input frequency
when SRC OFF44.1/48/88.2/96/176.4/192kHz
when SRC ON32 - 216kHz
Allowable frequency deviation+/-100ppm(when SRC OFF)
SDIF-3UNBALANCED
ConnectorBNC Connector x 2(L/R)
FormatSONY SDIF-3/DSD-raw
Input impedance75 ohms +/-20%
Clock synchronization frequency44.1kHz
DIGITAL OUT
S/PDIF,CASCADEUNBALANCED
ConnectorRCA pin jacks
FormatIEC60958-3(S/PDIF)
Output impedance75 ohms
AES/EBUBALANCED
ConnectorXLR-3-31(1:GND,2:HOT,3:COLD)
FormatAES3-2003/IEC60958-4(AES/EBU)
Output impedance110 ohms
SDIF-3UNBALANCED
ConnectorBNC Connector x 2(L/R)
FormatSONY SDIF-3/DSD-raw
Output impedance10 ohms +/-20%
Clock synchronization frequency44.1kHz
WORD SYNC IN
ConnectorBNC Connector
Input level5V TTL equivalent
Input impedance75 ohms +/-10%
Input frequency44.1k/48k/88.2k/96k/176.4k/192k Hz
Allowable frequency deviation+/-100ppm
WORD SYNC THRU/OUT
ConnectorBNC Connector
Output level5V TTL equivalent
Output impedance75 ohms +/-10%
Output frequency44.1k/48k/88.2k/96k/176.4k/192k Hz
Frequency stability+/-1ppm or less(Ta=25˚C)
USB
DEVICE
Connector4-pin USB A-type
ProtocolUSB 2.0 HIGH SPEED(480Mbps)
Power ratingDC 5.0V 0.5A
KEYBOARD
Connector4-pin USB A-type
ProtocolUSB 1.1 FULL SPEED(12Mbps)
Power ratingDC 5.0V 0.2A
Control input and output
Infrared receiverTASCAM RC-10 wireless remote controller
PHONES
ConnectorStandard 6.3mm (1/4') stereo jack
Maximum output45mW + 45mW (into 32 ohms load, 0.1% distortion)
PowerAC120V, 60Hz(US/Canada Version)
AC220-240V, 50-60Hz(UK/EUR/Australia Version)
Power consumption24W
Dimensions483(W)×45(H)×305(D)mm
weight4.2kg
Operating temperature range0 - +40˚C
Standard accessories3P power cord, Wireless remote controller (TASCAM RC-10), coin battery for testing remote control (preinstalled), screw kit for rack-mounting, warranty card, Owner's manual
Audio performance
Recording
Frequency response
PCM20 - 20kHz +0.1dB/-0.5dB (Fs=44.1k/48kHz,JEITA)
20 - 40kHz +0.1dB/-1dB (Fs=88.2k/96kHz,JEITA)
20 - 80kHz +0.1dB/-6dB (Fs=176.4k/192kHz,JEITA)
DSD20 - 50kHz +0.1dB/-3dB (DSD,JEITA)
20 - 100kHz +0.1dB/-12dB (DSD,JEITA)
Distortion
(THD+N, 1kHz)0.003% or less (Ref:-16dB/BALANCED,JEITA)
0.005% or less (UNBALANCED,JEITA)
S/N ratio
PCM(24bit mode)113dB or higher (Ref:-20dB/BALANCED,JEITA)
111dB or higher (UNBALANCED,JEITA)
DSD106dB or higher (Ref:-20dB/BALANCED,AES-17 20k LPF)
104dB or higher (UNBALANCED,AES-17 20k LPF)
Crosstalk(1kHz)108dB or higher (JEITA)
Playback
Frequency response
PCM20 - 20kHz +/-0.1dB (Fs=44.1k/48kHz,JEITA)
20 - 40kHz +0.1dB/-0.3dB (Fs=88.2k/96kHz,JEITA)
20 - 80kHz +0.1dB/-3dB (Fs=176.4k/192kHz,JEITA)
DSD20 - 50kHz +0.1dB/-3dB (DSD,JEITA)
20 - 100kHz +0.1dB/-12dB (DSD,JEITA)
Distortion
(THD+N, 1kHz)0.003% or less (Ref:-16dB/BALANCED,JEITA)
0.001% or less (UNBALANCED,JEITA)
S/N ratio
PCM118dB or higher (Ref:-20dB/BALANCED,JEITA)
116dB or higher (UNBALANCED,JEITA)
DSD116dB or higher (Ref:-20dB/BALANCED,AES-17 20k LPF)
114dB or higher (UNBALANCED,AES-17 20k LPF)