-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
The clean tone that made Little Walter famous- Custom built for Sound Pure! Eminence EPS-12C Speaker upgrade!!
See something you like? This item is gone, but not forever. It can be special ordered, and even customized!
We can get it fast!
Because of our special relationship with Little Walter we can get this as fast, or faster than anyone in the industry. In some cases, we even have preferred build slots we can offer you.
Want to know when one lands?
Notify MeWant to discuss a special order?
Want to hear what your guitar really sounds like? If you've never played through a Little Walter 50 watt, you may not actually know! This amp produces sounds as unique and nuanced as the finest boutique instruments--but this thing is no museum piece. It belongs on a stage! Honestly this is some of the most natural sounding clean tone you will ever hear in an amplifier, and the breakup is absolutely phenomenal. There is plenty of headroom for louder performances, but even at the lowest volume possible you have sparkly, warm tone and a suprisingly responsive feel. I've never played anything quite like it. To top it all off, these amps are handwired point-to-point by Little Walter owner Phil Bradbury to be clean and reliable--a fact that is well-known by endorsees like Vince Gill, Brent Mason, Reggie Young, and Travis Toy who test their roadworthiness on a regular basis. Join the ranks of some of the world's best and find out what Little Walter is all about!
Our 50 watt chassis is our most popular amp. Hand built, point-to-point construction that use Hammond Transformers, top quality signal capacitors, and octal pre-amp tubes. This amp has the clean tone that made Little Walter Tube Amps famous. This amp is a class AB, cathode biased amp that uses 6L6 power tubes with a direct out jack that can be ported to a board or P.A. system. Options for this amp include an effects loop and a switch to change from 50 watts to 25 watts.
All the Little Walter Tube Amps use Octal Pre-amp tubes and are hand wired with no circuit, tag, or turret boards. I believe the shortest signal path equates to the purest possible tone. These amps are all cathode biased and voiced to allow more low frequency tone to pass through the pre-amp. All my amps also have a direct line out that can be connected to your house PA or recording console. These amps can be ordered with Tweed, Lacquered Tweed, Tolex, or Cherry, Maple, or Walnut hardwood (hardwood based on availability of wood). I personally build these amps one at a time right here in North Carolina.
Electrical Requirements: 110/120 Volts AC (60 cycle)
Preamp Tube: 6SC7
Phase Inverter Tube: 6SL7
Power Tubes: 6L6GT
Rectifier Tube: 5U4
Power Transformer: Hammond: P-T290BX (600 volt/100ma)
Output Transformer: Hammond: P-TF22871 (4000 ohm Primary)
Fliter Capacitors: 1-30uf @ 450v, 2-20uf @ 450v
Input 1/Input 2: Normal Input
Controls: Volume for both inputs/Tone for both inputs
Output: 50 watts @ 4 ohms
Speaker: 12" Eminence EPS-12C
Line Out
Cabinet: Blonde with Dove Tail Joinery