-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
4004 is totally transparent and is the perfect choice in all close miking recording situations regardless of the sound source.
$2,429.95
Our best price is too low to print,
but we'll email it to you immediately!
How to get a lower price, instantly!
Why do we do this?
Some manufacturers have a "minimum advertised price", which restricts how low of a price we can display. By requesting an e-mail quote from us, you give us the ability to offer you a lower price than anywhere else on the web. A quote on the product will be sent instantly to the e-mail address you enter, and you can add the product to your cart at the lower price displayed in the e-mail.
The 4004 is an omnidirectional hi-voltage (130 V) close miking specialist with an extended on-axis frequency response from 10 Hz to 40 kHz (±2 dB).
An ideal measurement mic, the 4004 is a reference condenser microphone specially designed to handle extremely high sound pressure levels - up to 168 dB SPL before clipping occurs.
It has an unbeatable dynamic range of 124 dB from the noise floor to 1% THD and an extended headroom of 20 dB up to clipping level due to the special hi-voltage powering system.
The 4004 is acoustically identical with the reference microphone Type 4007, but differs in the powering system and the fact that the 4004 has a transformerless output
Directional characteristics: | Omnidirectional |
---|---|
Principle of operation: | Pressure |
Cartridge type: | 12 mm (0.47 in) pre-polarized condenser |
Frequency range, ± 2 dB: | 10 Hz - 40 kHz |
Sensitivity, nominal, ±2 dB: | 10 mV/Pa; -40dB re. 1V/Pa |
Equivalent noise level A-weighted: | Typ. 24 dB(A) re. 20 µPa (max. 26 dB(A)) |
Equiv. noise level ITU-R BS.468-4: | Typ. 36 dB (max. 38 dB) |
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): | 70 dB |
Total harmonic distortion (THD): | <0.5% up to 142 dB SPL peak, <1% up to 148 dB SPL peak |
Dynamic range: | Typ. 124 dB |
Max. SPL, peak before clipping: | 168 dB SPL peak (f<4 kHz) |
Output impedance: | <75 ohm |
Cable drive capability: | From microphone to HMA5000: Up to 20 m (6 ft) From HMA5000: Up to 300 m (984 ft) |
Power supply: | 130 V through HMA5000 |
Connector: | 4-pin modified XLR-M (High Voltage) |
Weight: | 150 g (5.29 oz) |
Capsule diameter: | 12 mm (0.47 in) |
Microphone length: | 165 mm (6.5 in) |
Operating temperature range: | -40 to +55°C (-40 to 131°F) |