-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
A Solid Transformer-Isolated Speaker-Level Line Out Box!
$150.00
Our best price is too low to print,
but we'll email it to you immediately!
How to get a lower price, instantly!
Why do we do this?
Some manufacturers have a "minimum advertised price", which restricts how low of a price we can display. By requesting an e-mail quote from us, you give us the ability to offer you a lower price than anywhere else on the web. A quote on the product will be sent instantly to the e-mail address you enter, and you can add the product to your cart at the lower price displayed in the e-mail.
The ISO Line Out box is NOT a load box. In other words, the amplifier must have a speaker, or suitable load, connected at all times. The ISO Line Out box is not a speaker cabinet emulator.
Operation:
Connect any available speaker output jack to one of the Speaker Thru jacks on the ISO Line Out box. If the amp has only one speaker output jack, connect this to one of the Speaker Thru jacks on the ISO Line Out box and plug the speaker into the other Speaker Thru jack. Connect the Line Out jack to a balanced or unbalanced jack of your mixer, effect or recording device. Set the appropriate level.
Line Out:
The Line Out jack is wired for balanced or unbalanced connections. The transformer is wired to the tip and ring connections of the jack. The cable shield is floated and can be referenced to the box ground ONLY when a balanced cable is used.
Phase Switch:
The phase switch is used to invert the phase of the signal. Set the switch in the up position to invert the phase, down for normal phase.
GND Ref Switch:
The ground reference switch can be used to reference the box ground to the Line Out cable ground. This should ONLY be used with the use of a balanced cable. For mono cables, leave this switch in the down position.
In our continuing effort to provide the very best tools for the serious musicians, we turned our attention to other links in the electric guitar signal chain. Having covered guitars, pickups, amps, cabinets and accessories such as the MiniMix II and ISO Line Out box, it was natural for us to further strengthen the entire signal path by developing a new line of pedals that will work superbly with our gear or with other manufacturers' products. Nearly two years in development, a lot of thought and time went into these pedals that will not only improve the overall sound of your rig, but provide added functionality and robust build quality that will provide many years of rock-solid performance under the most demanding playing environments.
Weight1 lbs
Dimensions5 × 5 × 5 in
Payments as low as $13/mo.