Total to pay:
$0.00
Tube-Tech RM2 - AES '09
- Products used:
- Tube-Tech RM 2 Tabletop frame that holds two vertical Tube-Tech Modules
- Tube Tech CM 1A Compressor for Tube Tech RM2 Tube Box
- Tube Tech EM 1A Tube Equalizer for Tube Tech RM2 Tube Box
- Tube Tech PM 1A Microphone Preamp for Tube Tech RM2 Tube Box
More text
Tube-Tech RM 2 is a two-slot rack that vertically accommodates any 2x Tube-Tech M-Series modules (for example such as the PM 1A and / or the EM 1A). The RM 2's two rack-unit frame lets you own and mou...
Less text
Tube-Tech RM 2 is a two-slot rack that vertically accommodates any 2x Tube-Tech M-Series modules (for example such as the PM 1A and / or the EM 1A). The RM 2's two rack-unit frame lets you own and mount multiple Tube-Tech modules together with one small two-channel rack. The power supply and internal voltage rails provide the higher supply voltages than what the modular 500 racks can offer, to drive tube-based electronics. Tube-Tech is available for purchase through Sound Pure, who is always available to answer any questions you have about recording gear and the recording process. Call Sound Pure toll free 888-528-9703, or e-mail them at sales(at)soundpure.com
Specs:
- Unique low distortion gain-reduction element
- All tube-based push-pull amplifier
- Multiple interconnection of several compressors via two busses
- LED display for monitoring compression and output
- Continuously variable attack and release time
- Gain Range (off to +30 dB)
- Variable Threshold (off to -30 dBu)
- Frequency response @ -3 dB: 5 Hz to 25 kHz
- Low noise: < -75 dBu @30 dB gain
- Clickless bypass switch
Description:
The TUBE-TECH CM 1A Compressor features a gain-reduction element, positioned immediately after the input transformer. It is controlled by the sidechain amplifier, which also contain the two time control circuits – one for fixed and one for variable Attack/Release. The two time-controllers can either be used separately or combined. This circuit contains semiconductor OP-amps for the entire control.
A tube-based push-pull amplifier follows the gain-reduction element with variable gain up to 30 dB. A dedicated Bus selector with three positions (Off, Link 1, Link 2) is used whenever you want to link several compressors together. Input and output transformers have a static-screen between the primary and secondary wirings. Input and Output is transformer balanced as well as fully floating.
Recommended accessories:
© Sound Pure LLC 2012. All Rights Reserved.
