Lynx Two B (Two 24-bit balanced analog inputs and six 24-bit balanced analog outputs), from Lynx

A Model Four inputs / four outputs B Model Two inputs / six outputs C Model Six inputs / two outputs Type Electronically balanced or unbalanced, XLR connectors on L2Audio Cable Level +4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV max., software selectable in channel pairs Bandwidth < 10Hz - 92 kHz @ 200 kHz sample rate < 10Hz - 46 kHz @ 96 kHz sample rate < 10Hz - 23 kHz @ 48 kHz sample rate (analog input to analog output) Input Impedance Balanced mode: 24 kW , Unbalanced mode: 12 kW Output Impedance Balanced mode: 100W, Unbalanced mode: 50W Output Drive Capability 600W impedance, 0.2 ?F capacitance A/D and D/A Type 24-bit, multi-level, delta-sigma Sample Rates 8 kHz to 200 kHz, including all standard rates with variable adjustment Bit Depth 8, 16, 24 or 32 bit file types On-board Buffer Size 16 Kbytes per input and output stream (mono or stereo) Analog In Performance (Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer) Frequency Response 20 - 20 kHz, ? 0.05 dB at 44.1 kHz sample rate Dynamic Range 117 dB, A-wtd. Signal-to-Noise 116 dB, A-wtd. Channel Crosstalk <-120 dB, 1 kHz signal @ -1dBFS THD+N -108 dB (0.0004%) @ -1 dBFS -104 dB (0.0006%) @ -8 dBFS 1 kHz signal, 22Hz - 22kHz BW Analog Out Performance (Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer) Frequency Response 20 - 20 kHz, ? 0.05 dB at 44.1 kHz sample rate Dynamic Range 117 dB, A-wtd. Signal-to-Noise 117 dB, A-wtd. Channel Crosstalk <-120 dB, 1 kHz signal @ -1dBFS THD+N -97 dB (0.0014%) @ -1 dBFS -104 dB (0.0006%) @ -8 dBFS 1kHz signal, 22Hz - 22kHz BW Digital I/O . Number / Type One input and one output AES/EBU or S/P DIF format, transformer coupled, XLR connectors on L2Sync Cable Sample Rates 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Sample Rate Conversion Supports conversion ratios up to 3:1 on digital input, 128 dB dynamic range Bit Depth 8, 16, 24 or 32 bit file types Control / Status Complete subcode and channel status support On-board Buffer Size 16 Kbytes per input and output stream (mono or stereo) LStream Expansion Ports . Number One external and one internal Compatibility Supports Lynx ADAT, AES/EBU, and other multi-channel expansion modules Type High-speed serial, eight channel input and output (each port) or sixteen channel input and output (single port), 24-bit data, 96kHz rate SMPTE Time Code I/O . Type LTC receiver (in) and generator (out) , BNC connectors on L2Sync Cable Frame Rates 24, 25, 29.97, 30 Hz - drop and non-drop Input Sync Rate 1/30 to 80 times nominal frame rate Input Levels 200 mV to 10V / 10KW Output Level 1V / 75W Clock I/O . Number External: one input and output, BNC connectors on L2Sync Cable Internal: one input and output on board-mounted headers Level / Impedance TTL (clock signals) / 1Vpp (video) 75W Type Input: word clock, 256X word clock, 13.5 and 27 MHz video clocks, NTSC or PAL composite video; Output: word clock On-board Digital Mixer Channel Capacity 32 input channels, 16 sub outputs Resolution / Dither 32-bit / TPDF, Shaped TPDF, or RPDF Monitor Mixing Any input to multiple outputs Metering Peak levels to -120 dB on all inputs and outputs Connections Audio Port Bracket-mounted 25-pin female D-sub connector for analog audio input and output Sync Port Bracket-mounted 15-pin high-density female D-sub connector for digital input and output, sync in and out Cables (Included) . L2Audio Cable 25-pin male D-sub to male and female XLR connectors on six-foot shielded twisted pair cabling L2Sync Cable 15-pin high-density male D-sub to (1) male and (1) female XLR on six-foot shielded twisted pair cabling and (4) female BNC connectors on two-foot 75W coaxial cabling Software Windows Drivers Windows 98 / ME / NT/ 2000 / XP: MME, ASIO 2.0, and DirectSound Macintosh Drivers ASIO 2.0 for OS 9 LynxTWO Mixer Application Provides complete control of digital mixer and all hardware settings. General . PCI Bus Version 2.2 compliant Data Transfers Up to 132 Mbytes/sec using custom 16-channel, zero-wait state, scatter-gather DMA engine; bus mastering Size 5.0" H X 7.4" W X 0.75" D (half-size PCI card) Shipping Weight 3.25 lbs. with cables Certifications CE and FCC Class B LStream Expansion Modules (Optional, for LynxTWO LStream port) LS-ADAT Provides sixteen-channel 24-bit ADAT optical I/O LS-AES Provides eight-channel 24-bit/96kHz AES/EBU or S/PDIF digital I/O

Building on the award winning performance of the LynxONE, LynxTWO incorporates the latest generation converter technology to create a device capable of precision never before achieved in a PCI audio card. With performance that exceeds stand-alone converters, LynxTWO sets new standard for signal purity, versatile synchronization, powerful hardware mixing, and extensibility to support a variety of multichannel formats including ADAT and multiple AES/EBU. 200kHz sample rate / 100kHz analog bandwidth (Supported with all drivers) Four 24-bit balanced analog inputs and outputs ("A" Model) Two 24-bit balanced analog inputs and six 24-bit balanced analog outputs ("B" Model) Six 24-bit balanced analog inputs and two 24-bit balanced analog outputs ("C" Model) +4dBu or -10dBV line levels selectable per channel pair 24-bit AES3 or S/PDIF I/O with full status and subcode support Sample rate conversion on digital input Non-audio digital I/O support for Dolby Digital? and HDCD 32-channel / 32-bit digital mixer with 16 sub outputs Multiple dither algorithms per channel SMPTE time code reader and generator with MTC conversion Composite video genlock Word, 256 Word, 13.5MHz or 27MHz clock sync Extremely low-jitter tunable sample clock generator Dedicated clock frequency diagnostic hardware Multiple-board audio data routing and sync Two LStream? ports support 8 additional I/O channels each Compatible with LStream modules for ADAT and AES/EBU standards Zero-wait state, 16-channel, scatter-gather DMA engine Windows 98 / ME / NT / 2000 / XP Drivers Macintosh ASIO 2.0 Drivers