|
||
The world's smallest and lightest 2X10 combo amp!
IN STOCK!
Ships immediately after order processed!
This amp packs a serious punch! With both forward and down firing 10 inch speakers, this amp can handle a broad range of thick sound that amplifies your acoustic instrument and takes your performance to the next level! flat response that brings out the true tone of your fine acoustic instrument.
Major flexability and portability in this great 2x10 combo amp! I was amazing at the natural sound and power this amp puts out with a McPherson acoustic plugged in. Even an external L.R. Baggs pickup like the M-1 sounds very nice through this amp. Also works well for keyboards, bass, cello and a variety of other instruments.
Call or Email Sound Pure with any questions on how you can make the best use of this Acoustic Image amp!
The goal for the Ten2 was to produce a 2x10 combo amp unlike any other. We wanted it to be smaller and lighter than any other on the market and we wanted it to be "in the family" sonically but with the more up front sound usually associated with a front firing cabinet.
The Ten2 was designed to play louder than our other combos to give the player more flexibility in the settings in which the amp is played. For example, the Ten2 is comfortably used in electric bass situations that would be too loud for our other combos. The Ten2 has the added versitility of the removable 600W head for even louder situations.
Small size and light weight were paramount. At 32 lbs and 17 inches tall, the Ten2 is the smallest and lightest 2x10 combo on the market. The Ten2 EX is even smaller and lighter at 25 lbs and 14 inches tall. Even with the compact size, this is a "no compromise" combo. The head unit is the same as the Clarus with all of the features needed to meet the most stringent requirements of musical instrument amplification.
The broad frequency response, high power output and smooth, high fidelity sound make the Ten2 the ideal combo for all applications: acoustic bass, electric bass, guitar, keyboards, vocals, etc. Think of it as a high performance, compact PA system.
Balanced, high fidelity sound, a little more “up front” than our other combos
Two-way sealed speaker system
10" downfiring woofer
10" front firing woofer
2.5" coaxial tweeter
Phase correcting crossover
Exclusive Room Coupling Control(tm) to help tame boomy acoustic settings
Lightweight (32 lbs), small (17 in high) molded polymer enclosure
Cabrio Docking System(tm) means head is removable for use as stand-alone unit
Available with one or two channel preamp
Combo jack input (either 1/4" or XLR)
Phantom power on XLR inputs
Three-band EQ preamp section per channel
Input and master level controls
Effects loop with return level control per channel
Switchable low cut filter per channel
Phase reverse switch per channel
Balanced direct out with ground lift
Digital effects with 6 presets and level control
Mute switch and pre/post EQ for direct out
Switchable limiter for high volume situations
Stereo capable with external power amp (2 ch preamp)
Headphone output
600 watt switch mode power amplifier
Switchable dual voltage operation (100-115V/220-240V)
Comes with fitted slip cover with cord storage pocket and shoulder strap
System (all models)
Frequency Response 30 Hz-18 kHz (40-14 kHz ±3 dB)
Max SP>118 dB/m
AC Power 100-115V/50/60 Hz or 220-240V/50 Hz,
switchable,
Size 17”Hx15”Wx13”D
Weight 32 lbs
Preamp (Mic and Instrument Inputs through combo jack
Mic Input 600 ohm balanced, XLR connector,
switchable 10 dB pad
Phantom Power 48 volts, on/off switch w/LED indicator
Instrument Input 1 M impedance, 1/4 inch jack
Direct Out +4 dB, balanced, XLR connector, ground
lift, pre/post EQ selector
Effects Loop Parallel type with return level control
Bass Control Shelving type, ±15 dB at 60 Hz
Mid Control ±15 dB at 650 Hz
Treble Control Shelving type, ±15 dB at 10 kHz
Low Cut Filter -12 dB/octave sweepable from 30 to 400
Hz
Phase Reverse Switchable 180 degree phase reverse
Effects
Type Digital with 6 presets and level control
Program Presets 3 reverb (hall, room, plate), delay,
ambient chorus, flange
Power Amp
Topology Class D (PWM)
Switching Frequency 500 kHz
Output Power 8 300W rms continuous, 350W rms music,
500W peak transient
External Speaker Output Neutrik Speakon type (pole 1), 2 min
load including internal speakers, if
connected
18 4 ±3 dB
>115 dB at 1 meter
17”Hx15”Wx13”D
±0.5 dB)
Output Power 4 500W rms continuous, 650W rms music,
1000W peak transient
Retail: $1,749.00
$1,599.00
BUY NOW!
Call our experts using:
888-528-9703 (toll free)
919-682-5552 (local/international +1)