Sonodore 4-microphone RCM-402/B Omni Mic System, from Sonodore

Sonodore MPA-502 Technical Specifications

·       Frequency response: 1.6 Hz to 580 kHz (-3dB)

·                                         20Hz to 20KHz (-0.1dB)

·       THD+N: 0.0001% at 0dB gain 0.001% at 53dB gain (at +16dBu, 20Hz to 20KHz)

·       Equivalent input noise: 0.4uV at 53dB gain 2uV at 0dB gain (A-weight)

·       CMRR: >90dB at 1KHz

·       Slew Rate: 20V/uS

·       Crosstalk: >100dB at 0-10KHz

·       Maximum output level: 10V ,+22dBu

·       Output impedance: 75 Ohms

·       Maximum output current: 50mA

·       Input impedance: 5KOhm unbalanced, 10KOhm balanced

·       DC offset : < ±2mV

·       Cable drive capability: > 100m

·       Gain: 0 to 53 dB (0 dB, 15 dB, 30 dB +0 to 23dB in 1dB steps)

·       Phantom Power: 48V, 10mA

·       Number of channels: 2

·       Input: 3-pin XLR female connector (balanced, transformerless)

·       Output: 3-pin XLR male connector (balanced, ground compensated)

·       Power requirements: 105-120V and 210-240V, 50 to 60 Hz

·       Power consumption: 6W

·       Weight: 1.7 kg

·       Dimensions: 155mm × 84mm × 190mm (4.92” x 4.09” x 1.77”)

Sound Pure is representing for sale, a professionally (and carefully) used, complete 4-microphone 60v Sonodore system including mounts, grids, standard power supplies, and a special custom-made 4-channel 60v batter operated power supply, in excellent condition and perfect working order.  Approximately $20,000 in value at current selling prices, a truly beautiful setup that has been used to create a number of award-winning recordings by its seller.   Seller will accept reasonable offers, and may contemplate breaking some of it, but would prefer to sell it as a compete “system.”  Anyone considering adding to their Sonodore collection, or investing in a comprehensive 60v system should look no further.    

Below are the items along with their current prices in Euro (current selling prices in Euro, available here for download http://www.northstarconsult.nl/content/files/Sonodore+pricelist+2009.pdf): 

In summary, the setup includes: 

- 4x Sonodore RCM-402/B 60-volt active powered omni mics; (sell for 2025 Euro/ea - 8100 Euro, new, approximately $10,500 USD)

- SMC-402 shockmounts and 5/8" adapters (520 Euro, new, $675 USD)

- 2x each of the PG78 and PG88 grids (4 total, 140 Euro/ea), for different HF response curves (560 Euro, new for the set, $725 USD)

- 2x MPS-502 AC-operated mic pres and 60v power supply including (2), IEC power cords (for US and EU) - works with balanced or unbalanced (2x which sell for 1795 Euro/ea, new, 3590 Euro/pr, $4650 USD) 

- cables and IEC power cords for the 4-channel custom mic pre as below - works with balanced only. The battery-operated mic pre (contains two parts, mic pre and battery supply), provides 60v supply, HPF of 40Hz and 100Hz.  [Note: To charge up the battery - do this with NOTHING connected, either mics or line outputs. Two days should do it. It will be able to run 12 hours once charged up, more than enough for a day lockout at a studio!]  (valued at approximately 3600 Euro, new, $4650 USD)

-Setup includes a complete high-end cable compliment (Mogami, etc.) included in the package, worth at least $1000.