-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
10x6, 24-bit, 96kHz, Portable FireWire Recording System
This item has been discontinued and is no longer available. Sometimes we will get our hands on a leftover or used unit.
Our experts can recommend to you the best alternative for your needs and keep in touch about used arrivals.
Want to know if one shows up?
Notify MeWant to discuss alternatives?
The PreSonus FireStudio™ Mobile combines the superior analog-circuit design and advanced platform technology of our acclaimed FireStudio rackmount interfaces with the ability to run on bus power in field applications. Now you can have enhanced audio performance for music recording and creation anywhere you can lug your laptop!
The Most Inputs of Any Mobile Interface
The FireStudio Mobile is a ten-input, six-output professional recording system that combines two PreSonus XMAX™ Class A microphone preamplifiers; six line-level, analog input channels; S/PDIF digital input and output; MIDI I/O; and headphone monitoring with separate gain control. The FireStudio Mobile beats any and all competition when it comes to flexibility and input count. You can record a whole band with the FireStudio Mobile.
The FireStudio Mobile is bundled with PreSonus Studio One Artist, our groundbreaking music creation program, and over 4 GB of virtual instruments, plug-ins, loops, and samples to get you started making music immediately.
True 48-Volt Phantom Power – Even When Powered By Your Laptop!
Here’s a dirty little secret: bus-powered mobile interfaces from other manufacturers deliver much less than the full 48 volts of phantom power that is specified by microphone manufacturers. This means even the finest condenser microphone can’t work at optimal internal gain levels, potentially compromising sound quality even before the signal gets to the mic preamp!
PreSonus president Jim Odom and his team of engineers went the extra mile and created an “internal switching power plant” that lets the FireStudio Mobile convert computer bus power into a full 48 volts of phantom power, as well delivering 30 volts to power the superb mic preamps you’ll read about next. On the Front
A pair of 3-LED level/clip indicators let you check the signal levels for channels 1 and 2, and a button enables 48V phantom power for the two mic channels. Also, on the front panel are gain knobs for the two mic/instrument inputs and for the main stereo outputs and a stereo headphone output with gain knob. The gain for the mic inputs ranges from –10 dB to +70 dB; the high-impedance instrument inputs range from –30 dB to +50 dB of gain. Finally, a power/sync indicator LED shows whether the FireStudio Mobile is receiving adequate power and is correctly receiving word clock.
Ins and Outs
For a compact, portable unit, the FireStudio Mobile is loaded with I/O. We start with a pair of combination XLR/TS mic/instrument jacks, which are in the inputs for channels 1 and 2. The XLR mic inputs are routed to the aforementioned XMAX solid-state mic preamplifiers. The high-impedance, TS instrument inputs let you plug guitars or basses directly into the front panel.
On the back are 6 more balanced, ¼-inch line level inputs for channels 3 through 8, plus a DB9 connector that accepts a breakout cable (included) to provide stereo S/PDIF digital I/O and MIDI I/O. You get two FireWire 400 ports: one port connects to your computer, and the other can be used to connect a hard drive or to daisy-chain any FireStudio-family interface, including the StudioLive 16.4.2 digital mixer, allowing you to integrate the FireStudio Mobile into a larger system.