Peluso Stereo CEMC6 Stereo Microphone Kit, from Peluso

Be Sure to Check out the Mp3 Sound Clips at the bottom of this page!

*Type: Condenser Pressure Gradient w/ 20mm capsule

*Frequency Range: 19Hz/25Khz

*Polar Pattern: Cardioid w/ removable capsule

*Sensitivity: 10mv/pa

*Impedance: 200 ohms

*SPL: 156 db w/ 20db pad

*Equivalent Noise: 14db (A-weighted)

*Power Requirements: Phantom - 48v +- 4v

*Current Consumption: < 3.0 MA

*Size: 22mm x 164mm

*Weight: 134 g

*Warranty: Peluso microphones are guaranteed against defects in material and workmanship for 3 years from date of purchase. Should you encounter any problem with this unit, promptly contact the company you purchased it from for assistance. The original dated sales receipt will be necessary for any warranty claim. Do not send any unit directly to Peluso Microphone Lab without prior authorization from our service department. Warranty coverage is limited to repair or replacement (at our option) of the microphone, and does not cover incidental damages due to use of this unit, nor damage caused by accidental misuse of this product.

Kits Include: Two Acoustically Matched Solid State Microphones, 2 Hard Mounts, 2 Shock Mounts, and 2 Foam Windscreens in Aluminum Flight Case with standard Cardioid Capsules

The best part of this kit is that you get to pick the additional capsules that you want. Pick from Sub Cardioid, Hyper Cardioid and Omni. We build the kits to match what you are looking for!

General Characteristics: This microphone has a 20 millimeter gold-sputtered diaphragm and a fixed cardioid pickup. Solid State Condenser microphones are very sensitive, capable of producing very subtle sonic details. They also pick up sounds outside the pattern, which can lead to powerful feedback. We strongly advise experimentation with placement and isolation with the gain initially set low to avoid equipment damage.

Power Requirements: Important - This unit requires phantom power at 48 volts, +/- 4 volts. . Each unit has been thoroughly checked before shipping, so if you hear no sound, check the cables, and that the phantom power on your mixer or separate power supply is switched on.

Microphone Cables: The microphone cable can have a profound effect on the sound of any microphone. Even the finest microphones will sound poor if the interconnect cable allows noise to enter, or causes distortion and degradation of sound. Use only the best microphone cable to obtain the optimum performance from your microphone.

Care Dust and foreign material can degrade the performance of a microphone over time, so always store the unit in its case. Remove fingerprints from the exterior with a camp soft cloth.