DPA 4041 S Omnidirectional Solid State Microphone, from DPA (B&K)

*Principle of operation: Pressure

*Cartridge type: 24mm (1in) condenser w. stainless steel diaphragm

*Frequency range: 10Hz - 20kHz -2dB with 4 - 6dB soft boost at 8 kHz

*Equivalent noise level A-weighted: Max. 7dB(A) re. 20 Pa

*Sensitivity: Nominally 90 mV/Pa -2dB

*Equiv. noise level ITU-R BS.468-4: Max. 19dB

* Total harmonic distortion (THD): 120dB SPL peak (<0.5% THD)

*Preamplifier frequency range: 3Hz to 40kHz (+0dB/-1dB)

*Preamplifier output impedance: Matches HMA4000 input

*Preamplifier cable drive capability: With HMA4000: Up to 300m (984ft)

*Microphone length: 170mm (6.69in)

*Maximum sound pressure level: 144dB SPL peak before clipping

*Weight: 190g (6.7oz)

The Type 4041-S is an omnidirectional microphone that uses the 24mm (1in) Modular Microphone Cartridge MMC4041 with the totally transparent MMP4000-S Solid State Preamplifier. The cartridge MMC4041 can be unscrewed from the preamplifier which allows for the exchange of the preamplifier module. The frequency response from 10Hz to 20kHz with a 4-6 dB soft boost around 8kHz matches the response of the highly acclaimed Type 4040 Hybrid Microphone. The 4041-S is powered via the standard HMA4000 Microphone Amplifier (not included with the 4041-S), a microphone system that offers a totally transparent audio path with an exceptionally low noise floor of maximum 7dB(A) and a SPL handling capability of 144dB SPL peak.