DPA 3532-SP A-B Stereo Microphone Kit, from DPA (B&K)

*Principle of operation: Pressure

*Cartridge type: 24mm (1in) condenser w. stainless steel diaphragm

*Power supply: Phantom P48

*Frequency range: 20Hz - 20kHz -2dB with 4 - 6dB soft boost at 8kHz

*Directional characteristics: Omnidirectional

*Equivalent noise level A-weighted: Max. 8dB(A) re. 20 Pa

*Sensitivity: Nominally 50mV/Pa -2dB: -26dB re. 1 V/Pa

* Equiv. noise level ITU-R BS.468-4: Max 20 dB

*Total harmonic distortion (THD): 120dB SPL peak (<0.5% THD)

*Preamplifier frequency range: 20 Hz- 50 KHz +/- 0.50dB

*Preamplifier output impedance: <200 Ohm

*Preamplifier cable drive capability: Up to 100m (328ft)

*Microphone length: 170mm (6.69in)

*Maximum sound pressure level: 134dB SPL peak before clipping

*Weight: 190g (6.7oz)

The 3532-SP is a complete state-of-the-art A-B Stereo Kit with two 4041-SP microphones, carefully matched within 1dB on both frequency response, sensitivity and self-noise. It is the ultimate choice for the demanding engineer and audio purist who emphasises clarity, openness, precision, low self-noise and high sensitivity.

The kit is designed for a broad range of uses, like as main pair for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more. You get a bright and transparent sound quality with lots of headroom. With its on-axis soft boost, the 4041-SP omni microphone can be angled to use as a natural equalizer.

Besides the paired microphones, the briefcase contain a stereo boom, holders and windscreens.