Chandler Limited Germanium Tone Control EQ, from Chandler

Remember a single PSU can power multiple units so call us for details on getting multiple units with a single PSU!!!

Individual bypass for passive and active EQ sections.

Interactive/Independent- Use this toggole to select between interactive "Pultec/Lang" type curves where you can boost and cut at the same time to create a strange and wonderful EQ conbinations or create a more standard low frequency with pass filter combination.

Germanium Drive- this controls the input gain of the Germanium amp. The amount of gain is related to the Feedback control position.

Feedback Control- Controls the amount of ouput signal fed from the amplifier output back to its input. As well as acting as a volume type control, this know seriously affects the tone of the unit. With feedback to the left there is less volume, less Total Harmonic Distortion, and more high frequencies. With feedback to the right there is more volume, more Total Harmonic Distortion, and a low end peak around 30Hz. Combine this with the Germanium Drive control, thick, and pad switches for a cool variety of sounds.

Thick Section- This is a varition of the Thick setting on the Germanium Mic Pre. It is the passive portion of the equalizer and has controls for boosting and cutting at the same time to create combinations in either Interactive or Independent modes.

Treble This active band has 18dB of boost or cut and is selectable between bell and shelf curves. The bell sections are at a wider Q than the Presence band for flexibility and there are eight EQ points.

Presence- This is an active portion with 15dB boost or cut on eight frequencies. For variety the Q is slightly sharper than the bell setting on the Treble band.