-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
The S4X models
The S4X monitors are not just an improved versions of the famous and highly acclaimed S4A but an evolutionary development. Like their predecessors, they have been designed for medium size control rooms. Given their excessive power, the S4X are also capable of working in larger environments. Because both S4X models have identical tweeters and midrange drivers handling frequencies above 350 Hz, any combination of either model will integrate perfectly in a 5.1 or 7.1 installation.
X-ART & newly developed broadband amplifier
All models of the SX-Series are equipped with the new X-ART tweeter. The X-ART tweeter has a 4dB higher efficiency, a 3dB higher maximum sound pressure level, and an increase in frequency response up to 50 kHz. The newly designed broadband A/B amplifier has been developed by ADAM to perfectly match the needs and capabilities of the X-ART tweeter. The entire range of sound can be heard as never before.
New HexaCone-woofers
The new HexaCone-woofers are designed with larger and longer voice coils that deliver more linear excursion for higher SPL max. values. A stronger magnetic structure is added as well for an optimum in efficiency and accuracy.
Optional digital input and magnetical shielding
All SX-models (except the S1X) can be optionally retrofitted with a 24 bit/192 kHz D/A Converter featuring an AES/EBU (XLR) and a SPDIF (RCA) inputs as well as a R/L/Mono switch.
All models can optionally be magnetically shielded.
The front panel (from S2X upwards)
Six controls to change the settings for input sensitivity, lower frequencies, and higher frequencies can be found on the new, highly sophisticated front panel."
S4X-H
The S4X-H midfield monitor combines the X-ART tweeter with a 5" HexaCone-midrange and two redeveloped 9" HexaCone-woofers.
Each of the woofers and midrange drivers are driven by a 250 W ICE module. To allow the X-ART tweeter to extend to its highest frequencies, it is combined with a unique ADAM Audio A/B amplifier. This unique amplifier has ultra low distortion and an immense internal bandwidth of more than 1MHz. Combine this amplifier with the X-ART tweeter and you get a fascinating sound that is effortless and of highest resolution.
Improperly designed larger monitors are always at risk at compromising the overall sound with bass reproduction that is too intense. As in all ADAM Audio designed speakers, both versions of the S4X have been designed to combine both the power and volume of the bass (28 Hz at -3 dB point) with the highest possible precision. Combine this with the transparent high and midrange frequencies of the S4X and this will give an engineer a new quality level of control and performance for larger rooms.
br> Woofer
Number:2
Basket:9"
Cone material:HexaCone
Midrange
Number:1
Type:Cone driver
Basket:6"
Cone material:HexaCone
Tweeter
Number:1
Type:Xart
Diaphragm area:4"
Built-in Amplifiers
Woofer:2
Type:PWM
Amp. power RMS / music: 250 W / 350 W
Midrange:1
Type:PWM
Amp. power RMS / music:250 W / 350 W
Tweeter:1
Type:A/B
Amp. power RMS / music: 50 W / 100 W